Seat memory problem
11-15-05, 02:33 PM
#1
Driver School Candidate
Thread Starter
Join Date: Sep 2005
Location: VA
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Seat memory problem
Has anyone had a problem with the seat memory saving the correct position? Mine will save the position I adjust to but lose it after I turn off the car.
I'll be taking it back to the dealership for a fix, just curious if I might be missing something?
I'll be taking it back to the dealership for a fix, just curious if I might be missing something?
11-15-05, 05:32 PM
#4
Also, I believe the car has to be in "P" (parked) for it to work.
On page 201 of the manual:
Conditions for memorized position activation
-Engine switch in “IG-ON” mode and selector lever in ”P”
position, with the vehicle stopped.
-Engine switch in “OFF” mode and within 30 seconds of
opening front passenger’s door.
If any seat position memory switch is pushed while one of the
memorized seat position profiles is being activated, the
operation will stop.
To activate the system, push the desired button (“1”, “2” or “3”)
again.
The seat position memory control system cannot be operated
while the vehicle is moving.
If the vehicle’s battery is disconnected, the computer’s
memory will be erased and the memorized positions will have
to be set again.
On page 201 of the manual:
Conditions for memorized position activation
-Engine switch in “IG-ON” mode and selector lever in ”P”
position, with the vehicle stopped.
-Engine switch in “OFF” mode and within 30 seconds of
opening front passenger’s door.
If any seat position memory switch is pushed while one of the
memorized seat position profiles is being activated, the
operation will stop.
To activate the system, push the desired button (“1”, “2” or “3”)
again.
The seat position memory control system cannot be operated
while the vehicle is moving.
If the vehicle’s battery is disconnected, the computer’s
memory will be erased and the memorized positions will have
to be set again.
Last edited by SGT; 11-15-05 at 05:44 PM.
11-15-05, 08:17 PM
#5
Originally Posted by SGT
Also, I believe the car has to be in "P" (parked) for it to work.
On page 201 of the manual:
Conditions for memorized position activation
-Engine switch in “IG-ON” mode and selector lever in ”P”
position, with the vehicle stopped.
-Engine switch in “OFF” mode and within 30 seconds of
opening front passenger’s door.
If any seat position memory switch is pushed while one of the
memorized seat position profiles is being activated, the
operation will stop.
To activate the system, push the desired button (“1”, “2” or “3”)
again.
The seat position memory control system cannot be operated
while the vehicle is moving.
If the vehicle’s battery is disconnected, the computer’s
memory will be erased and the memorized positions will have
to be set again.
On page 201 of the manual:
Conditions for memorized position activation
-Engine switch in “IG-ON” mode and selector lever in ”P”
position, with the vehicle stopped.
-Engine switch in “OFF” mode and within 30 seconds of
opening front passenger’s door.
If any seat position memory switch is pushed while one of the
memorized seat position profiles is being activated, the
operation will stop.
To activate the system, push the desired button (“1”, “2” or “3”)
again.
The seat position memory control system cannot be operated
while the vehicle is moving.
If the vehicle’s battery is disconnected, the computer’s
memory will be erased and the memorized positions will have
to be set again.
Thread
Thread Starter
Forum
Replies
Last Post
