I'm not 100% sure if this has been asked, I've tried searching throughout the forums using the search tools but have had no luck..
I've got a 98 GS300 that I've been doing little things on since I've bought it.. I got around to doing a LED conversion kit, but I can't seem to figure out the bulbsizes for the middle overhead area that has the dome light and the 2 personal lights for the driver/passenger, vanity lights on mirrors, and the 2 lights that are in the foot well areas..
Does anyone have any idea what bulbsizes these are or where I can find a comprehensive list of the bulb sizes..
Thanks in advanced!
Don
I've got a 98 GS300 that I've been doing little things on since I've bought it.. I got around to doing a LED conversion kit, but I can't seem to figure out the bulbsizes for the middle overhead area that has the dome light and the 2 personal lights for the driver/passenger, vanity lights on mirrors, and the 2 lights that are in the foot well areas..
Does anyone have any idea what bulbsizes these are or where I can find a comprehensive list of the bulb sizes..
Thanks in advanced!
Don
firelizard
Moderator
close
- Join DateSep 2012
- LocationCanada
- Posts:2,139
-
iTrader Positive Feedback100
-
iTrader Feedback Score(1)
-
Likes:567
-
Liked:512 Times in 406 Posts
Lead Lap
I tried a few different led lamps in the dome light but what I did was use two 3175 bulbs in a V shape configuration which produced the best and brightest light output. I made 2 ends for the bulbs out of a light thin metal sheet had laying around and had it shaped like a tape cassette player roll to hold the two bulbs in place (since it is only meant for one bulb).
Cool white led's were ok but I used the 12 led xenon single lights like these:
https://www.ebay.com/itm/2-x-Xenon-W...ss!60085!US!-1
Cool white led's were ok but I used the 12 led xenon single lights like these:
https://www.ebay.com/itm/2-x-Xenon-W...ss!60085!US!-1
Pit Crew
jettate
Pit Crew
close
- Join DateJan 2021
- LocationTexas
- Posts:181
-
iTrader Positive Feedback0
-
iTrader Feedback Score(0)
-
Likes:132
-
Liked:34 Times in 28 Posts
I have the LED bug now, I have replaced footwells, trunk, glovebox and reverse lights, Just received the doors and keyhole light in green LED. Not looking for overhead bright lights. Any bulb i am missing? I also have the ash tray bulb as it took the same bulb as the keyhole but in white. I have non HID headlights and want to go LED for the low beams. Any recommendations on non HID LED replacement bulbs? Thank you.
Rookie
Quote:
Have you done the license plate bulbs? Those are an easy change. Big difference too (LED on right of course) 194/168 bulb.Originally Posted by jettate
I have the LED bug now, I have replaced footwells, trunk, glovebox and reverse lights, Just received the doors and keyhole light in green LED. Not looking for overhead bright lights. Any bulb i am missing? I also have the ash tray bulb as it took the same bulb as the keyhole but in white. I have non HID headlights and want to go LED for the low beams. Any recommendations on non HID LED replacement bulbs? Thank you.
Pit Crew
jettate
Pit Crew
close
- Join DateJan 2021
- LocationTexas
- Posts:181
-
iTrader Positive Feedback0
-
iTrader Feedback Score(0)
-
Likes:132
-
Liked:34 Times in 28 Posts
I was not sure on the vanity mirror lights. Anyone know what bulb that takes? I want lower light LEDs for dome, map and vanity. I did not upgrade the license plate ones as I do not want to bright light my license plate for police. I tend to drive really fast on the highway and do not to help the police get my plate. WOW! What's the top speed of the GS300? I want to find out!



