L.E.D Board
hot glue, doesnt come off either since the leds produce so little heat
i want to add a 3rd 
Depending on the size of the boards you can fit 4 in total in the overhead dome .
Also LED's do need to breathe as they do produce some heat if they are brighter ones with more than 20 lumens . Have it mounted so the forward face of the LED is not touching anything . It will extend its life by not creating hotspots .
Why not use 3m tape instead?
Depending on the size of the boards you can fit 4 in total in the overhead dome .
Also LED's do need to breathe as they do produce some heat if they are brighter ones with more than 20 lumens . Have it mounted so the forward face of the LED is not touching anything . It will extend its life by not creating hotspots .
Depending on the size of the boards you can fit 4 in total in the overhead dome .
Also LED's do need to breathe as they do produce some heat if they are brighter ones with more than 20 lumens . Have it mounted so the forward face of the LED is not touching anything . It will extend its life by not creating hotspots .
i guess to avoid any LED's touching the plastic i could make a panel and 3m tape it to them.... might look into that,thanks
Instructor
Joined: Aug 2008
Posts: 1,179
Likes: 6
From: Ohio
I have the 6 LED Board from V-LED's and it's very bright! Here is my video/pics of it and some other LED's.
https://www.clublexus.com/forums/es3...sion-pics.html
https://www.clublexus.com/forums/es3...sion-pics.html
Thread
Thread Starter
Forum
Replies
Last Post
J3ffrey
IS - 3rd Gen (2014-present)
6
Jan 22, 2016 09:32 AM
