When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Im looking to buy some wheels soon and found some that i liked. The wheels are currently on a 2008 Lexus GS300. I drive a 1998 Lexus GS300. Are the specs for aftermarket wheels reletively same for both cars??
In short if the wheels fit the 08 GS fine, will they fit the 98 GS fine, or will they look totally different.
I dont have the offset yet, but here are the specs. Wheels are staggered.
Wheels = 5 x 4.50 or 5 x 114.3
Front wheels = 20x8.5
Rear wheels = 20x10
Tires are 245/35/20 275/30/20
The car is not lowered but i will prollly lower it with some tanabe springs.
Also how do 20" wheels ride. I dont wanna loose the smoothness/quitness of the stock GS, but i know it will suffer a little.
fronts are a little tall but if the car isnt too lowered, should work. as for stock specis, for a 20x8.5, i believe +35 is as low as u can get, for the rears, 20x10, a +43 is about there for stock before camber and before lower.
ride will suffer... but well, looks over comfort...
4.5inches = 114.3mm =) haha, i learned this back in the day when i was looking for rims for my honda prelude... its just that some manufactuers list in inches, some in mm...
you should be fine! im running same size with 37mm (f) 40mm (r). the 245-35-20 (f) 255 35 20 (r) and im on air tucking the heck out of thoes 20's. i also have a set of tanabe nf210 for sale if you are interested $200.00 shiped.