Howdy
Thread Starter
Driver School Candidate
Joined: Mar 2008
Posts: 45
Likes: 0
From: Western Australia
Howdy
Have been lurking around here for a little while answering all my own questions by searching but I thought I'd say hi.
I run a workshop in Perth, Western Australia dealing primarily with Nissan and Toyota Imports. My daily driver switches between a 303hp @ All 4 Evo 7 and a UCF11 that we just supercharged.
After getting done by the filth for 92k in a 70 zone I decided it was time to flick the Evo, having that much accesible power is dangerous for my licence. At around the same time I picked up a '98 GS300 with a light front ender. As I'm the Junction Produce and Tanabe/SSR agent for Australia, as well as a Trust Dealer you can virtually see all the cogs ticking over. Add to that a JZS161 Front Cut in stock and you dont have to be Einstein to work out what I'm building.
Ordered all the JP stuff from Shuji this week and am currently deciding what SSR 20s to run. In the interim I'm taking the 20" Zweels off the wife's F50 Cima (Q45) and putting them on.
This is the last big car we built - S14 Silvia - JZX100 1JZ - 503rwhp:
http://images.franzonline.net/2007-0...h/img_5460.jpg
Look forward to getting to know you all,
Jash
I run a workshop in Perth, Western Australia dealing primarily with Nissan and Toyota Imports. My daily driver switches between a 303hp @ All 4 Evo 7 and a UCF11 that we just supercharged.
After getting done by the filth for 92k in a 70 zone I decided it was time to flick the Evo, having that much accesible power is dangerous for my licence. At around the same time I picked up a '98 GS300 with a light front ender. As I'm the Junction Produce and Tanabe/SSR agent for Australia, as well as a Trust Dealer you can virtually see all the cogs ticking over. Add to that a JZS161 Front Cut in stock and you dont have to be Einstein to work out what I'm building.
Ordered all the JP stuff from Shuji this week and am currently deciding what SSR 20s to run. In the interim I'm taking the 20" Zweels off the wife's F50 Cima (Q45) and putting them on.
This is the last big car we built - S14 Silvia - JZX100 1JZ - 503rwhp:
http://images.franzonline.net/2007-0...h/img_5460.jpg
Look forward to getting to know you all,
Jash
Last edited by Seize; Mar 19, 2008 at 06:23 AM.
Trending Topics
Loves Snickerdoodles!
Joined: Jun 2002
Posts: 19,740
Likes: 75
From: San Diego, California
Hey there Jash, welcome to Club Lexus 
Judging by that Silva you've worked on, I'm sure your GS build will be just as awesome
*oh, and by the way, I had to edit your post. Only Club Lexus authorized vendors are allowed to promote their goods and services, websites etc.
If you'd like to become a vendor send me a pm and I'll point you in the right direction
Judging by that Silva you've worked on, I'm sure your GS build will be just as awesome
*oh, and by the way, I had to edit your post. Only Club Lexus authorized vendors are allowed to promote their goods and services, websites etc.
If you'd like to become a vendor send me a pm and I'll point you in the right direction
Thread
Thread Starter
Forum
Replies
Last Post
DRAG2GS300
2Gen GS430 / 400/ 300 Classifieds (98-05)
2
Feb 23, 2010 01:45 AM
TLW
Club Lexus Vendor Marketplace
195
Jul 8, 2009 09:41 PM
Tanabe USA
GS - 2nd Gen (1998-2005)
6
Nov 18, 2006 05:28 PM
SUPRATRD
GS - 2nd Gen (1998-2005)
93
Aug 31, 2005 06:09 PM