Need Help!?
Thread Starter
Rookie
Joined: Jan 2002
Posts: 66
Likes: 0
From: Wisconsin
Need Help!?
Does anybody know where I can get red and clear tails for a 94 ES300? I looked and can't really find any? and also where can i find aftermarket parts. It's hard to find any on the net. any good sites?
Lexus Connoisseur
Joined: Mar 2001
Posts: 19,892
Likes: 607
From: USA
Red & clear tails for the ES300 is pretty non existent to my knowledge. Many of the Camry V6 aftermarket parts will fit your vehicle. Toysport.com is a good start and also www.camryman.org as well as our own...www.teamsc3.com.
Good Luck!
Good Luck!
Lexus Champion
Joined: Oct 2001
Posts: 2,314
Likes: 3
From: North Carolina
ES
I also have a 94 ES300, I have looked for the tail lights and have had someone look on their parts computer in the modifications store I go to. There are none made that I know of. Or that they know of. I am going to get the KandN Air Filter for $62 at AutoZone. That's something you can do.
Lexus Connoisseur
Joined: Mar 2001
Posts: 19,892
Likes: 607
From: USA
Whoa...$62 for a K&N? No way! That's a rip off. I got my K&N for $35 bucks out here at K&N's largest distributor here in Riverside,CA (K&N Engineering based here also in Riverside). Try www.summitracing.com. The part number you want for 94-96 is 33-2052. 33-2145 for 97 and up ES300. Both parts are identical.
Pole Position
Joined: Dec 2001
Posts: 216
Likes: 0
From: Louisiana
I know the front ones are hard as hell to make clear.. I mean heating the sealant up and takeing out the lens and resealing it perfectly.. Its got me scared even to attempt.. I already tried on my fog lights, and I broke the spring that holds the bulb in place.. So for now I had to duct tape! Thank god it still works!
Trending Topics
ClubLexus Stories
Celebrating Lexus & Toyota from Around the Globe
Top 10 Most Confusing Things Lexus Has Ever Done!
Joe Kucinski
2026 Lexus ES Review: Lexus Re-Embraces Founding Principles
Michael S. Palmer
10 Lexus Bargains That are Cheaper Than a New Toyota RAV4
Joe Kucinski
8 Weirdest Things Lexus Has Ever Built
Verdad Gallardo
10 Lexus Designs That Have Aged Like Fine Wine
Verdad Gallardo
8 Tips for Improving Your Hybrid or Plug-in Hybrid's Efficiency!
Michael S. Palmer
10 Best Lexus Models No One Remembers
Joe Kucinski
TRD Off-Road Premium: Best 2026 4Runner, Except This One Thing
Michael S. Palmer
Top 10 Lexus & Toyotas to Drive Before You Die!
Joe Kucinski
Lexus Champion
Joined: Oct 2001
Posts: 2,314
Likes: 3
From: North Carolina
Lights
That is good to know, I don't want to be spending too much for a filter. The tail lights are easy to change. You open the trunk and take off the carpeted panel against where the tail lights are. The tail lights are behind it just like the headlights. Easy to change. The headlights I am going to change soon, But what brand should I get. Autozone was going to order some for me for $40 or something. THey were "AIC" brand or something. Is that a good brand, they have fiberglass backs, so I know they will not melt the wiring. And about the front lights, making them clear corners. I have not done it yet, but yes, heating the rubber is not a good idea. I think it would be easier to cut it and have it put back in by the same stuff that is used to replace windshields... DOes that not sound safer than putting heat near the paint? I am going to check that out more. If anyone knows anything else, let me know.
Lexus Champion
Joined: Oct 2001
Posts: 2,314
Likes: 3
From: North Carolina
Tail lights clear?
No, sorry my tail lights are not clear. I have to get some damage fixed, broken left tail light. I backed into one of my Dad's cars. But after that, I am changing them. They will not be clear, just different color bulbs behind the red plastic.
Pole Position
Joined: Dec 2001
Posts: 216
Likes: 0
From: Louisiana
Thats cool. I would like the clear lights for my es though. Then obviously I would need the colored bulbs. But shoot, I'm scared even to attemp to make the front ones clear.. Much less the rear ones. I would love to have though!
