Engine Mount Torque Specs
#1
Driver School Candidate
Thread Starter
Engine Mount Torque Specs
I'm in need of the engine mount torque specs for the hydraulic front mount on an 02 ES300. There are three different bolt locations. First is the three bolts which mount the bracket to the engine block. Second the three bolts which mount to the vehicle frame. Third is the top bolt which connects the engine mount bracket to the mount itself. I need the torque specs for all three locations. Your help is appreciated.
Thanks in advance!
Thanks in advance!
#2
I'm in need of the engine mount torque specs for the hydraulic front mount on an 02 ES300. There are three different bolt locations. First is the three bolts which mount the bracket to the engine block. Second the three bolts which mount to the vehicle frame. Third is the top bolt which connects the engine mount bracket to the mount itself. I need the torque specs for all three locations. Your help is appreciated.
Thanks in advance!
Thanks in advance!
The following users liked this post:
difuria (08-18-17)
#3
Driver School Candidate
Thread Starter
The repair shop which services our vehicles at work looked up the specs for me. I can't guarantee accuracy of their information.
The single upper bolt is torqued to 70ft lbs.
The three bolts that connect the bracket to the engine block are torqued to 47ft lbs.
The three bolts which connect to the lower frame are torqued to 47ft lbs.
The single upper bolt is torqued to 70ft lbs.
The three bolts that connect the bracket to the engine block are torqued to 47ft lbs.
The three bolts which connect to the lower frame are torqued to 47ft lbs.
The following users liked this post:
SAlirezaV (06-02-19)
#4
Driver School Candidate
I'm in need of the engine mount torque specs for the hydraulic front mount on an 02 ES300. There are three different bolt locations. First is the three bolts which mount the bracket to the engine block. Second the three bolts which mount to the vehicle frame. Third is the top bolt which connects the engine mount bracket to the mount itself. I need the torque specs for all three locations. Your help is appreciated.
Thanks in advance!
Thanks in advance!
Thread
Thread Starter
Forum
Replies
Last Post
new_berlin
ES - 1st to 4th Gen (1990-2006)
4
07-14-13 04:26 PM
vinny186
ES - 1st to 4th Gen (1990-2006)
3
11-23-06 11:18 AM