ES - 1st to 4th Gen (1990-2006) Forum for all 1990 - 2006 ES300 and ES330 models. ES250 topics go here as well.

changing fuel filter car struggle to start

Thread Tools
 
Search this Thread
 
Old 05-18-17, 11:16 PM
  #1  
jamestravo
Driver School Candidate
Thread Starter
 
jamestravo's Avatar
 
Join Date: May 2017
Location: NC
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default changing fuel filter car struggle to start

I had changing of fuel filter car struggle to start now what do I need to do any help would be awesome have ES300 2002
Old 05-19-17, 06:57 AM
  #2  
HomerJay
Intermediate
 
HomerJay's Avatar
 
Join Date: May 2013
Location: NY
Posts: 337
Received 50 Likes on 44 Posts
Default

More information would be helpful. Is the check engine light on? How does the car run after it starts? Maintenance up to date? Also, what fuel filter did you change, the one in the tank?
Old 05-19-17, 08:41 AM
  #3  
Oro
Racer
 
Oro's Avatar
 
Join Date: Dec 2013
Location: wa
Posts: 1,802
Received 339 Likes on 294 Posts
Default

The fuel filter is a wire mesh screen integral to the pump as I recall. How did you change it? Did someone open the gas tank?
Old 05-19-17, 09:45 AM
  #4  
mitmaks
Lead Lap
 
mitmaks's Avatar
 
Join Date: Jun 2011
Posts: 463
Received 2 Likes on 2 Posts
Default

he must be talking about fuel filter inside engine bay, not the mesh on fuel pump. If you changed your fuel filter and car doesnt want to start, you have to prime fuel system, get all the air out.
In fuel injected car you simply turn the key to ON position but DO NOT start your car. This activates fuel pump and it pumps fuel into your fuel lines, filter, etc. Do this several times and then try starting your car.
Old 05-19-17, 10:00 AM
  #5  
HomerJay
Intermediate
 
HomerJay's Avatar
 
Join Date: May 2013
Location: NY
Posts: 337
Received 50 Likes on 44 Posts
Default

The fuel filter on a 2002 is in the tank. I am not aware of an inline filter unless it's aftermarket.
Old 05-19-17, 10:01 AM
  #6  
Oro
Racer
 
Oro's Avatar
 
Join Date: Dec 2013
Location: wa
Posts: 1,802
Received 339 Likes on 294 Posts
Default

Originally Posted by mitmaks
he must be talking about fuel filter inside engine bay, not the mesh on fuel pump. If you changed your fuel filter and car doesnt want to start, you have to prime fuel system, get all the air out.
There is no stock/OE fuel filter in the engine bay of a 2002 ES300.

One possibility is that if the rear seat was removed to access the pump/filter, one of the SIPS connectors along the base of the c-pillars could have become disconnected. This will cause the PCM to disable the fuel pump. I had this happen once.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
gripau1
SC430 - 2nd Gen (2001-2010)
19
11-17-22 07:28 PM
kpal
RX - 1st Gen (1999-2003)
4
07-27-18 03:31 PM
stevengtt
RX - 2nd Gen (2004-2009)
1
12-21-10 08:19 AM
cwu
RX - 1st Gen (1999-2003)
11
07-11-07 09:11 PM
ginjuice
Performance
10
01-12-06 08:12 PM



Quick Reply: changing fuel filter car struggle to start



All times are GMT -7. The time now is 08:10 AM.