foglight mod- different scenario.

Subscribe
Mar 2, 2006 | 08:46 PM
  #1  
I did the foglight mod with some help from this thread https://www.clublexus.com/forums/sho...d.php?t=145544. But I only achieved half I was hoping for . I really wanted be able to run all three lights at the same time (my fogs always turned off on with brights) and since the foglights aren't on the same circuit as the headlights, they don't turn off when I leave the car anymore, a compromise I can deal with. I was hoping if someone can help me find a solution and also let me know what fuse I used to hardwire the setup. I have some pics to follow. My setup is different because it is a 93 Es and the thread was meant for a 97'-01'. I not sure if he encountered the same problems. aw look, you can see my baby celebrity and my seadoo to the side of the car, memories

foglight mod- different scenario.-dsc00180s.jpg  

Reply 0
Mar 2, 2006 | 08:48 PM
  #2  
This is the yellow 20 amp fuse that I used to provide power into the relay. I just stuck the wire into the slot. The black wire leads into the relay. The tape just secures the relay in place.

foglight mod- different scenario.-dsc00181s.jpg  

Reply 0
Mar 2, 2006 | 08:50 PM
  #3  
Also it would be nice to know what this is, it is to the bottom left of the steering wheel and I took the cover off so that you can get a look at it.

foglight mod- different scenario.-dsc00182s.jpg  

Reply 0
Mar 2, 2006 | 11:42 PM
  #4  
Doesn't matter what year you have. It's still voltage from the low/high beam powering the stock relay that trips with the fog light switch. All you have to do is find a small, constant 12v supply of voltage to run your relay with. There are a bunch of them.


That is the wiper relay the best I can remember. IDK Download the factory service manual for a '93 ES 300.
Reply 0
Mar 3, 2006 | 05:30 PM
  #5  
where do you get the factory service manual?
Reply 0
Subscribe