Hi, I recentedly dropped my CT and I was wondering if anyone had any idea on how to adjust the rear camber? My driver side rear is -3.6 and my passenger rear is -2.3. I want to get wheels but I need my camber to be able to adjust before picking up a set of wheels.

Anyone with a dropped CT can help??

 

Why so much how much did you lower the car?

 

Anyway, from the manual:

"Camber is not adjustable. If the measurement is not within the specified range, inspect the suspension parts for damage and/or wear, and replace them if necessary."

This refers to the rear only. For the front check my other thread.

It also says;

Camber (Unloaded Vehicle):
-1.00 deg. +/- .75 deg

So technically a -1.75 camber angle on a stock vehicle is acceptable.

 

i have bc coilovers.

maxed out the front. rears are about 5 thread counts from max on the spring.

 

Got a pic of the car's ride height?

 

The manual Def says "rear camber is Not adjustable". Perhaps double check the coilovers for even drop/height to perhaps balance out that camber

I'm hoping sooner or later someone will make decent camber arms for our cars

 

back from the dead ...... REAR CAMBER ARMS ..... $219

http://www.meganracing.com/product.a...=1703&catid=91