Bob4256's SGM Build Thread
Thank you sir. I used to rub a little bit in the front on sharp turns when I first dropped the car but that went away pretty quickly.
Wheels are 20x9 +38 and 20x10.5 + 45. If you get lower offsets, you may rub and you will have to roll/pull your fenders. I think Im dropped about 2 inches all around? Just a rough estimate.
As long as you dont get any crazy offsets, you should be fine
Wheels are 20x9 +38 and 20x10.5 + 45. If you get lower offsets, you may rub and you will have to roll/pull your fenders. I think Im dropped about 2 inches all around? Just a rough estimate.
As long as you dont get any crazy offsets, you should be fine
I plan to get 245/30/20F & 285/25/20R.
Thread Starter
Lexus Champion
iTrader: (17)
Joined: Sep 2010
Posts: 4,965
Likes: 11
From: Weston, FL
The offsets are set when the wheels are made, tires have nothing to do with it. But you will rub with certain tires so you need to make sure you get the correct sizes
Last edited by bob4256; Jan 22, 2013 at 08:42 AM.
Thread Starter
Lexus Champion
iTrader: (17)
Joined: Sep 2010
Posts: 4,965
Likes: 11
From: Weston, FL
Thread Starter
Lexus Champion
iTrader: (17)
Joined: Sep 2010
Posts: 4,965
Likes: 11
From: Weston, FL
Thread Starter
Lexus Champion
iTrader: (17)
Joined: Sep 2010
Posts: 4,965
Likes: 11
From: Weston, FL
Just replaced my interior LEDs with 6K LEDs from VLED
Ive had the blue VLED bulbs and a LED kit from Precision LED. These 6K VLED bulbs are the best IMO.
The following pics are with my garage closed and lights on



Now these pics are with my garage door closed and lights off




Ive had the blue VLED bulbs and a LED kit from Precision LED. These 6K VLED bulbs are the best IMO.
The following pics are with my garage closed and lights on



Now these pics are with my garage door closed and lights off




Here is Concavo Wheel's coverage of the Club Lexus of Florida 4th annual Virginia Key meet!
http://www.youtube.com/watch?v=nnsuPr4ONNo
http://www.youtube.com/watch?v=nnsuPr4ONNo
Thread Starter
Lexus Champion
iTrader: (17)
Joined: Sep 2010
Posts: 4,965
Likes: 11
From: Weston, FL
Nah, I decided that I want to get a rep vertex front lip and sides. I kind of grew out of the INGs look.
Thanks bro I appreciate it






















