SUPRAboy80

I installed the Exact Motorsports RCA's and the LS400 bbk on my 98 GS400 and now I have the brake light on... I need help resolving this issue please.

The RCA's obviously have nothing to do with it... they just allowed me to install the bbk with no clearance issues...

And YES... I checked to make sure the E-brake was NOT on....


Thanks,
Marcus

chrispy

iTrader: (21)

Check your brake fluid level. If it's low, fill it up again.

GSteg

iTrader: (15)

This happened after installing the RCA and LS400s?

SUPRAboy80

Yes...


I will check the level when I lower the car back down.. I checked it when the car was in the air ( on all four corners and pretty much level) So I'll check again when I get it back down.


I adjusted the coilovers to a set point and when I put it back down the car was SLAMMED in the front!!! he he... but waaay to low to drive it. So I have it back up in the air now to raise the coilovers... which is a PITA btw... anyone have a good way of doing it? the "spring perch" is so hard to tun when compressing the spring!!! i.e. making the car go up/ raising the coilovers

SUPRAboy80

pics, pics, pics!!!

GS FONZy

iTrader: (6)

Cool, does your upper control arm hit the wheel well while driving?

SUPRAboy80

just finished raising the car 3/4 inch in the front... we'll see how it goes now!!! post pics laterz.. hehe

Alexus_300

iTrader: (4)

Check to see if you accidentally stretched out your ABS line or damaged one of the sensors. Thats what happened to me.