Bexy's progress....
#1
Bexy's progress....
Hey CL. Well I just got Bexy on 2/18/15 not too long ago so this is how she looks as of today.... I'll update when I get new things updated on her. So far she got full interior led swap which I will update picture later this week or next week due to the cold weather this whole week...=]
Current mod as June 2016:
-TRD Kit
-RSR coilovers
-Seibon cf FP lip
-LED interior lights
-Project kics lug nuts
-Cusco front stuct bar
-LED strip lights (Trunk)
-Side skirt puddle lights
-SPC rear camber arms
-OEM foglights (nigel jdm)
-Llumar full front clear bra
-Chrome trim door handles
-Exled usa led interior lights
-Cutom full cf steering wheel
-LED "Lexus" logo door lights
-LED side mirrors puddle lights
-Lexon exclusive rear roof spoiler
-Junction Produce Fusa & Tsuana
-12' JL Audio sub w/ JL Audio amp
-Michelin PSS 225/35/19 and 255/30/19
-LEMs intake tube w/ AEM round air filter
-Tommy Kaira axleback w/ Rowen quad tips
-VS-XX 19x8 +34 w/ project kics 15mm spacers and 19x9.5 +45
-Full custom cf power door switch, ac vents, push button, shift ****
Current mod as June 2016:
-TRD Kit
-RSR coilovers
-Seibon cf FP lip
-LED interior lights
-Project kics lug nuts
-Cusco front stuct bar
-LED strip lights (Trunk)
-Side skirt puddle lights
-SPC rear camber arms
-OEM foglights (nigel jdm)
-Llumar full front clear bra
-Chrome trim door handles
-Exled usa led interior lights
-Cutom full cf steering wheel
-LED "Lexus" logo door lights
-LED side mirrors puddle lights
-Lexon exclusive rear roof spoiler
-Junction Produce Fusa & Tsuana
-12' JL Audio sub w/ JL Audio amp
-Michelin PSS 225/35/19 and 255/30/19
-LEMs intake tube w/ AEM round air filter
-Tommy Kaira axleback w/ Rowen quad tips
-VS-XX 19x8 +34 w/ project kics 15mm spacers and 19x9.5 +45
-Full custom cf power door switch, ac vents, push button, shift ****
Last edited by is3501007; 03-18-17 at 03:59 AM.
#6
It fits fine for me. I didn't have to do any modifications at all just had to do a little adjustment to have it fit a little better. It took me about 20-30 minutes to install since Im not really fimilar with the stock intake and how to remove it. With time and patient, you will figure it out =]
Trending Topics
#12
Driver School Candidate