Bexy's progress....
 

Hey CL. Well I just got Bexy on 2/18/15 not too long ago so this is how she looks as of today.... I'll update when I get new things updated on her. So far she got full interior led swap which I will update picture later this week or next week due to the cold weather this whole week...=]

Current mod as June 2016:


-TRD Kit
-RSR coilovers
-Seibon cf FP lip
-LED interior lights
-Project kics lug nuts
-Cusco front stuct bar
-LED strip lights (Trunk)
-Side skirt puddle lights
-SPC rear camber arms
-OEM foglights (nigel jdm)
-Llumar full front clear bra
-Chrome trim door handles
-Exled usa led interior lights
-Cutom full cf steering wheel
-LED "Lexus" logo door lights
-LED side mirrors puddle lights
-Lexon exclusive rear roof spoiler
-Junction Produce Fusa & Tsuana
-12' JL Audio sub w/ JL Audio amp
-Michelin PSS 225/35/19 and 255/30/19
-LEMs intake tube w/ AEM round air filter
-Tommy Kaira axleback w/ Rowen quad tips
-VS-XX 19x8 +34 w/ project kics 15mm spacers and 19x9.5 +45
-Full custom cf power door switch, ac vents, push button, shift knob




http://i73.photobucket.com/albums/i2...37_resized.jpg
http://i73.photobucket.com/albums/i2...04_resized.jpg
http://i73.photobucket.com/albums/i2...49_resized.jpg
http://i73.photobucket.com/albums/i2...28_resized.jpg
http://i73.photobucket.com/albums/i2...38_resized.jpg

got some decent pics of my interior leds

http://i73.photobucket.com/albums/i2...224_195651.jpg
http://i73.photobucket.com/albums/i2...224_195726.jpg
http://i73.photobucket.com/albums/i2...224_195834.jpg
http://i73.photobucket.com/albums/i2...224_195712.jpg

just got my injen short ram intake installed today! :thumbup::thumbup::)
http://i73.photobucket.com/albums/i2...226_102848.jpg
http://i73.photobucket.com/albums/i2...226_102905.jpg

How is the fitment and install? I read that the injen has some parts that don't match up perfectly and some small
Modifications need to be made to install properly

Congrats on your new car,,
Looks beautiful two tone interior...:)

It fits fine for me. I didn't have to do any modifications at all just had to do a little adjustment to have it fit a little better. It took me about 20-30 minutes to install since Im not really fimilar with the stock intake and how to remove it. With time and patient, you will figure it out =]

ha... thanks!:thumbup:

Heres another minor work I got installed as well. =]
http://i73.photobucket.com/albums/i2...226_202825.jpg

Heres bexy with the TRD kit, Tommy Kaira axleback w/ Rowen tips, painted red calipers, and foglights! =]

http://i73.photobucket.com/albums/i2...4_061038-1.jpg
http://i73.photobucket.com/albums/i2...4_061031-1.jpg
http://i73.photobucket.com/albums/i2...4_115920-1.jpg
http://i73.photobucket.com/albums/i2...4_120137-1.jpg
http://i73.photobucket.com/albums/i2...4_120308-1.jpg

Monstrous tips! How does the Kaira axle back sound?

Not as loud. It more like a roar when you gas it. Ill post a video if I ever get a chance when it stops raining.

hey man i also just got trd diffuser .. did you have to cut bumper for fitment ? i was told u have to am i wrong ? looks good by the way !!!

Yes! I saw my local shop that did it. When you get the kit, they provide you templete where to place it on the oem bumper. The part that needed to be cut was the rear reflector so that the rear diffuser will fit. Thanks for the compliment:thumbup::thumbup::thumbup::)

Just got my Lexon rear roof spoiler installed! =]
http://i73.photobucket.com/albums/i2...327_095819.jpg
http://i73.photobucket.com/albums/i2...327_095835.jpg
http://i73.photobucket.com/albums/i2...327_095928.jpg
http://i73.photobucket.com/albums/i2...327_100102.jpg

Here's a video clip of my tommy kaira axleback exhaust with the rowen tips. =]