Hoebag Edition Tail Lights
#16
Lexus Champion
iTrader: (4)
hoebag was my previous screen name. i modified the same style tail lights i had for cherplex (not my best work though, sorry bud), and he has called them hoebag taillights since then. the original design was matte black outer trim, retain the chrome line, and cherry red lenses. there are many ways of painting the tail lights though as shown above. scotturnott took all of this to the extreme though with his frankenstein tails
#17
Instructor
iTrader: (1)
hoebag was my previous screen name. i modified the same style tail lights i had for cherplex (not my best work though, sorry bud), and he has called them hoebag taillights since then. the original design was matte black outer trim, retain the chrome line, and cherry red lenses. there are many ways of painting the tail lights though as shown above. scotturnott took all of this to the extreme though with his frankenstein tails
This is sick ...
#19
Pole Position
iTrader: (5)
A while back I picked up the Hoebag tails that were made for Cherplex's white SC, so unless I go another route you'll see them resurrected within a year or so, once I buy a chassis.
I am actually thinking about another more radical taillight idea, so who knows the Hoebag tails might be for sale sometimes soon...
I am actually thinking about another more radical taillight idea, so who knows the Hoebag tails might be for sale sometimes soon...
#21
Driver School Candidate
Join Date: Jun 2014
Location: MD
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
#22
Pole Position
iTrader: (5)
...and here's a picture of the Hoebag / Cherplex tails installed on my friends SC300 w/T's Project kit and Signature Evolution lip wing this past week:
Last edited by GZZ-TT; 07-12-15 at 12:26 PM.
#23
Lexus Test Driver
iTrader: (22)
i ruined 2 lights trying to figure it out. i have pictures somewhere. i'd have to look.
edit:
https://www.clublexus.com/forums/sc-...ml#post6390689
in post #5 - break the tab that the box cutter is pointing towards.
hope this helps.
#26
Lexus Test Driver
iTrader: (22)
not along with it - there is no reason to touch the keyhole. the clear reverse part basically blocks the inner housing from coming out because the keyhole tapers outward inside the housing. if you break the tab, flex the housing, and then remove this part, the inner will separate from the outer easily just like the driver side.
#27
Pole Position
iTrader: (5)
not along with it - there is no reason to touch the keyhole. the clear reverse part basically blocks the inner housing from coming out because the keyhole tapers outward inside the housing. if you break the tab, flex the housing, and then remove this part, the inner will separate from the outer easily just like the driver side.
(Yes, not touching the keyhole, remove the whole outer lens along with the middle reverse light clear lens, negating the need to cut the keyhole off.)
Last edited by GZZ-TT; 07-15-15 at 10:16 AM.
#28
Driver School Candidate
Thread
Thread Starter
Forum
Replies
Last Post