Sc400 to manual clutch pedal assembly question (having a small issue)
#1
Rookie
Thread Starter
Join Date: Jul 2011
Location: Fl
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
Sc400 to manual clutch pedal assembly question (having a small issue)
Hey what's up guys! I'm the guy that put the ka 5 speed in my sc400. Car has been driving about a month and everything has been moving flawlessly except for one issue. My clutch pedal assembly was really flimsy. It would flex whenever I pushed the pedal causing the pedal to hit the floor before the clutch was engaged all the way.
We took the assembly out and added some bracing and it helped a lot but now it seems to be getting worse.
I have the 2 bolts by the master cylinder and then we added a bottom bolt at the bottom to see if it would help and it's not.
I am using an sc300 manual clutch pedal assembly and pedal. Any recommendations would be greatly appreciated guys!
We took the assembly out and added some bracing and it helped a lot but now it seems to be getting worse.
I have the 2 bolts by the master cylinder and then we added a bottom bolt at the bottom to see if it would help and it's not.
I am using an sc300 manual clutch pedal assembly and pedal. Any recommendations would be greatly appreciated guys!
Last edited by marcojdm; 08-06-12 at 11:31 AM.
#2
Lexus Test Driver
iTrader: (6)
When i mounted mine, i cut a square roughly the size of the brace out of the padding so that it would sit flush. It sounds like you need to cut padding. Because there are only 3 screws which fix the brace, and i onlu used 2 and it seems to be sturdy. Unless youve got hulk legs, it does sound like a parding issue.
Charley
Charley
#3
Rookie
Thread Starter
Join Date: Jul 2011
Location: Fl
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
I'll take a better look at it tomorrow. It seems more like my assembly is flexing. There was a crack when we took it off the first time.
Would you happen to have any pics for reference? Thanks a lot man!
Would you happen to have any pics for reference? Thanks a lot man!
Thread
Thread Starter
Forum
Replies
Last Post