RX - 2nd Gen (2004-2009) Discussion topics related to the 2004 -2009 RX330, RX350 and RX400H models

Lexus Logo on Carpets Falling Off

Thread Tools
 
Search this Thread
 
Old 10-13-14, 07:41 PM
  #1  
roadbike56
Driver
Thread Starter
 
roadbike56's Avatar
 
Join Date: Aug 2014
Location: North Carolina
Posts: 166
Received 5 Likes on 4 Posts
Default Lexus Logo on Carpets Falling Off

The Lexus Logo on one of my carpets is falling off. I'd like to re-attach it. I had the same problem with our Highlander. Tried super glue but that only lasted a couple weeks. Has anyone else had this problem and been successful in reattaching the logo to the carpet?
Old 10-13-14, 08:30 PM
  #2  
chuckbass
Pit Crew
 
chuckbass's Avatar
 
Join Date: Jun 2012
Location: CA
Posts: 133
Likes: 0
Received 3 Likes on 2 Posts
Default

Have you tried a fabric glue? Should be pretty easy to find at a local Walmart or Target. My wife and I have made repairs to our microfiber sofa, hats, etc..with the stuff.
Old 10-13-14, 11:24 PM
  #3  
jakenbake
Lead Lap
 
jakenbake's Avatar
 
Join Date: Aug 2013
Location: Arizona
Posts: 517
Likes: 0
Received 13 Likes on 7 Posts
Default

Use some 1 minute epoxy. You can find it at any hardware store.
Old 10-14-14, 06:09 AM
  #4  
thomas1
Pole Position
 
thomas1's Avatar
 
Join Date: Sep 2006
Location: Sacramento, California
Posts: 3,047
Received 100 Likes on 85 Posts
Default

Nope best solution is Contact cement made by weldwood. just did it. That stuff is extremely tough. I have been using it for vinyls, carpet, etc since 1972. You put some on both surfaces let dry for 15 minutes and then attach. I used blue masking tape on the carpet to keep glue where it need to be.
Old 10-14-14, 07:13 AM
  #5  
roadbike56
Driver
Thread Starter
 
roadbike56's Avatar
 
Join Date: Aug 2014
Location: North Carolina
Posts: 166
Received 5 Likes on 4 Posts
Default

Originally Posted by thomas1
Nope best solution is Contact cement made by weldwood. just did it. That stuff is extremely tough. I have been using it for vinyls, carpet, etc since 1972. You put some on both surfaces let dry for 15 minutes and then attach. I used blue masking tape on the carpet to keep glue where it need to be.
Thanks to all. OK I'm going to look for the Weldwood product. I still have my Highlander logos so between the two cars, I've got several to attach.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
bird333
IS - 2nd Gen (2006-2013)
1
06-08-16 07:48 AM
DJWLDW
LS - 4th Gen (2007-2017)
9
09-21-14 11:47 AM
H60Driver
IS F (2008-2014)
10
12-28-13 03:14 PM
JonCAGS300
Car Chat
3
04-03-07 12:20 PM
jimjaix
IS - 2nd Gen (2006-2013)
15
03-17-07 02:38 PM



Quick Reply: Lexus Logo on Carpets Falling Off



All times are GMT -7. The time now is 08:21 AM.