replacing ignition starter switch
07-07-16, 07:05 AM
#1
Driver School Candidate
Thread Starter
replacing ignition starter switch
Does anyone out there have any helpful diagrams to removing switch on 96 sc300? i dont enjoy just tearing into something without knowing what to expect.........I HATE surprises.
07-10-16, 09:20 AM
#3
Driver School Candidate
replacing ignition starter switch
Literally all you have to do is take the bezel off, put your key in, turn it to ACC, and push the little button on the button of the cylinder while pulling. It will come right out.
If you're talking about the actually electrical switch, theres one Phillips screw on the back of the cylinder and it'll come off.
If you're talking about the actually electrical switch, theres one Phillips screw on the back of the cylinder and it'll come off.
Last edited by DEMONSC4; 07-10-16 at 09:23 AM.
The following users liked this post:
rlsc430 (10-09-21)
The following users liked this post:
rlsc430 (10-09-21)
Thread
Thread Starter
Forum
Replies
Last Post
robpon93
GS - 2nd Gen (1998-2005)
11
10-08-20 03:36 PM
Mooglide93
ES - 1st to 4th Gen (1990-2006)
5
01-29-12 02:14 AM