240sx with 2jz not starting.
03-19-12, 04:35 PM
#1
Driver School Candidate
Thread Starter
Join Date: May 2011
Location: fl
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
240sx with 2jz not starting.
well i did the 2jz swap from a 93 lexus sc300. w58 tranny. everything is done. ive been driving it around but i need to hook up a water temp gauge, and basically i had a misfire. i pulled fuel rail to check if all injectors were spraying and number 3 wasnt. i drove back to my house and pulled the rail out and put in another injector and again checked if all injectors were spraying and they were. i put rail back in and i tried to start it and now it trys to start but it just backfires and spins the motor in oposite direction for a split second. uhmm its not modded or anything. it is a complete stock sc300 motor with just a stage 3 clutch. any ideas anyone :/ oh and fuel pump is a q45 v8 fuel pump and using stock fpr and stock injectors and everything stock. lol thanks for any feedback.
Thread
Thread Starter
Forum
Replies
Last Post
