Dash Assembly
#1
Driver School Candidate
Thread Starter
Join Date: Mar 2002
Location: Washington
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Dash Assembly
IS it common for the electronic dash assembly to go out every few years. I just bought a 1990 LS 400 and the dealership is raping me for $2200 tax inc. Has anyone else had difficulty with this? Thanks in advance.
Mike
Mike
#2
Bluegr*** Performance
Join Date: Feb 2002
Location: North Kentuckarolinay
Posts: 1,532
Likes: 0
Received 0 Likes
on
0 Posts
2200$!!! WTH and GD.
Dude - what is bad on it? Lights out? Check around for some bulbs, get a manual and DIY. Good luck. Or check with an electronics store. Unless it is guages.
Dude - what is bad on it? Lights out? Check around for some bulbs, get a manual and DIY. Good luck. Or check with an electronics store. Unless it is guages.
#3
Driver School Candidate
Thread Starter
Join Date: Mar 2002
Location: Washington
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Dash
They say that it's the chip or something in the dash assembly itself. I guess the part is supposed to be $1300 alone. Labor an Tax equals about $2200.00. I love the car but I'm pissed.
#4
Driver School Candidate
Join Date: Nov 2001
Location: Seattle
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Dash problem
What exactly went out? I have heard of LS400 gauge illumination problems. Somthing about the printed circuit board. Sounds like a dealer only problem to me.
#5
Driver School Candidate
Thread Starter
Join Date: Mar 2002
Location: Washington
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
my dash
The part that was the curcuit board on the dash assembly. It is only a dealer part and guess what? They could'nt find one in the U.S. so they are doing all new guage and all for the same rediculous price of the dash assembly. Man I love this car but I hope this doesn't happen to me again in the next few years.
#6
Dash
My 91 LS400 speedo needle went half dark.
Im goin to get a quote on a salvage unit
out of 90-93 LS400. Then have a pro put it in.
I could call the dealer, but they screwed me in the past.
Im goin to get a quote on a salvage unit
out of 90-93 LS400. Then have a pro put it in.
I could call the dealer, but they screwed me in the past.
Thread
Thread Starter
Forum
Replies
Last Post