Datasystems ASR681 Installed - Anyone have knowledge of operation??
#1
Driver
Thread Starter
Join Date: Feb 2009
Location: PA
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
Datasystems ASR681 Installed - Anyone have knowledge of operation??
I have the ASR681 installed and working in the LS600hl BUT I can't get out of normal mode. My instructions are in Japanese which I can't read...haha. I really need some help how to get into the extreme mode so I can slam the car before it leaves for SEMA on Thursday night. My box that is wired in works and only have H1 & H2 setting with 0-5 (Zero being the high and 5 being as low as it can go in normal mode) which works perfect.
Could someone call me who knows how to work this and school me how to work it?? Or you can Email me at brian@foxmarketing.net anytime.
I really appreciate the help boys and will give you a ton of credit for the help at least.
Could someone call me who knows how to work this and school me how to work it?? Or you can Email me at brian@foxmarketing.net anytime.
I really appreciate the help boys and will give you a ton of credit for the help at least.
#7
Trending Topics
#9
Rookie
Join Date: Feb 2011
Location: Canada, Ontario, Mississauga
Posts: 63
Likes: 0
Received 1 Like
on
1 Post
since i the initial setup for the asr681 is different then the asc680 i am posting this to let future asr681 users know how to set it up and use it. heres the steps i was guided to follow by "FoxCars" users here on clublexus forum. this can be done anytime you have the car started to reset chasis or set height.
1.start car
2.(must use wireless controller to set it up to have it linked to the wired module)
wireless controller hold all 4 buttons down or both downwards buttons until it beeps then u will see testing mode on the screen, if u hold it longer it will show ver 1.6 on the screen.
3. now ur on the screen to setup which chassis car model u have. for my ls430 05 its 7E i beleive. so press up or down until u select ur model then press mode to set it.
4. now ur on the screen to setup which mode u want to run it in. srd or spl . of course we would want spl , then press select button to set it up.
5. now ur on the h1 or h2 set height screens. with asr theres only normal / h1 / h2 settings you can save. in h1 click select and it will blink all 3 variables. choose ur height accordingly and press mode to save. if you wish to go to super low mode, press down until it hits 9 then hold down until it beeps and ull be in L mode.
so hope that helps the future asr681 users. and special thanks for FoxCars once again for helping me out.
1.start car
2.(must use wireless controller to set it up to have it linked to the wired module)
wireless controller hold all 4 buttons down or both downwards buttons until it beeps then u will see testing mode on the screen, if u hold it longer it will show ver 1.6 on the screen.
3. now ur on the screen to setup which chassis car model u have. for my ls430 05 its 7E i beleive. so press up or down until u select ur model then press mode to set it.
4. now ur on the screen to setup which mode u want to run it in. srd or spl . of course we would want spl , then press select button to set it up.
5. now ur on the h1 or h2 set height screens. with asr theres only normal / h1 / h2 settings you can save. in h1 click select and it will blink all 3 variables. choose ur height accordingly and press mode to save. if you wish to go to super low mode, press down until it hits 9 then hold down until it beeps and ull be in L mode.
so hope that helps the future asr681 users. and special thanks for FoxCars once again for helping me out.
The following users liked this post:
badumtums (12-19-23)
#11
Driver School Candidate
since i the initial setup for the asr681 is different then the asc680 i am posting this to let future asr681 users know how to set it up and use it. heres the steps i was guided to follow by "FoxCars" users here on clublexus forum. this can be done anytime you have the car started to reset chasis or set height.
1.start car
2.(must use wireless controller to set it up to have it linked to the wired module)
wireless controller hold all 4 buttons down or both downwards buttons until it beeps then u will see testing mode on the screen, if u hold it longer it will show ver 1.6 on the screen.
3. now ur on the screen to setup which chassis car model u have. for my ls430 05 its 7E i beleive. so press up or down until u select ur model then press mode to set it.
4. now ur on the screen to setup which mode u want to run it in. srd or spl . of course we would want spl , then press select button to set it up.
5. now ur on the h1 or h2 set height screens. with asr theres only normal / h1 / h2 settings you can save. in h1 click select and it will blink all 3 variables. choose ur height accordingly and press mode to save. if you wish to go to super low mode, press down until it hits 9 then hold down until it beeps and ull be in L mode.
so hope that helps the future asr681 users. and special thanks for FoxCars once again for helping me out.
1.start car
2.(must use wireless controller to set it up to have it linked to the wired module)
wireless controller hold all 4 buttons down or both downwards buttons until it beeps then u will see testing mode on the screen, if u hold it longer it will show ver 1.6 on the screen.
3. now ur on the screen to setup which chassis car model u have. for my ls430 05 its 7E i beleive. so press up or down until u select ur model then press mode to set it.
4. now ur on the screen to setup which mode u want to run it in. srd or spl . of course we would want spl , then press select button to set it up.
5. now ur on the h1 or h2 set height screens. with asr theres only normal / h1 / h2 settings you can save. in h1 click select and it will blink all 3 variables. choose ur height accordingly and press mode to save. if you wish to go to super low mode, press down until it hits 9 then hold down until it beeps and ull be in L mode.
so hope that helps the future asr681 users. and special thanks for FoxCars once again for helping me out.
Thread
Thread Starter
Forum
Replies
Last Post
spikerjack
RX - 2nd Gen (2004-2009)
2
06-15-11 01:08 PM