kkasaki

Hi, everyone. Can anyone identify which is the front which is the rear for me?
I try to find information about these.
But no luck yet, Thank you

KING

iTrader: (1)

Just a wild guess here. But if the white text prints on the blue coils mean spring rates, then the higher stiff rate should usually be in the front.

So, 12/2002 front, 11/2002.

Just a wild guess.

KING

iTrader: (1)

And also, by how long the screws on the RIGHT pair, I say those should go in the rear. And the ones on the left should go in the front.

doodoo

iTrader: (8)

It looks as if the two on right are for rear. To make sure look at the hole at the bottom of the coilovers. The rear has a bigger hole on one side and a smaller hole on the other. And the fronts have a same size hole on both sides. The hole that you insert into the bolt. Hope you get what im trying to say.

xtr3me

What they said ⬆

Bilstein numbering system is user friendly.
For example, if the coilovers were left and right specific the numbers would look like below
6668 - Front Left
6669 - Front Right
6670 - Rear Left
6671 - Rear Right

Since you have 2 of each -
6669 - Front
6670 - Rear

LiCelsior

iTrader: (32)

good pick up

fronts are the first 2, rears are the latter. those kinda look like they use the OEM strut mounts too.

kkasaki

got it, thanks. bought from yahoo auction through rinkya

kkasaki

does anyone have torque spec for all the bolt and nut for suspension, thankyou

LiCelsior

iTrader: (32)

fronts- https://www.clublexus.com/forums/ls4...del-ls430.html

rears- https://www.clublexus.com/forums/ls4...del-ls430.html

Lavrishevo

iTrader: (1)

It's too bad Bilstien does not make shocks for our LS's. Let's us know how she rides with your coilovers.

xtr3me

LS430
Bilstein B14 Series
47-086401

Lavrishevo

iTrader: (1)

That's a coilover kit correct? I'm talking something comparable to the KYB's that can be used with stock springs.