LS430 vibrations while in Drive, on the brakes.
#1
Driver School Candidate
Thread Starter
LS430 vibrations while in Drive, on the brakes.
Hello All!,
I just picked up a 2006 LS430 with 103k.
First off i love the car. Definitely a change of PACE coming from a Mazdaspeed 3.
I do have a question regarding a vibration.
I noticed the car is silky smooth in Park. Not a drop of Vibration through the cabin. I cant even tell if its on.
However, when i put it drive and I am on the brakes i feel vibrations. Nothing alarming, just that its there.
Is this the norm?
I just picked up a 2006 LS430 with 103k.
First off i love the car. Definitely a change of PACE coming from a Mazdaspeed 3.
I do have a question regarding a vibration.
I noticed the car is silky smooth in Park. Not a drop of Vibration through the cabin. I cant even tell if its on.
However, when i put it drive and I am on the brakes i feel vibrations. Nothing alarming, just that its there.
Is this the norm?
#3
Driver School Candidate
Thread Starter
Have you tried cleaning MAF and throttle body? See this thread.
https://www.clublexus.com/forums/ls4...-cleaning.html
https://www.clublexus.com/forums/ls4...-cleaning.html
#5
Driver School Candidate
Thread Starter
Thanks for the input. I am going to give the MAF a proper cleaning again with a 30 minute ECU reset. I also added a bottle of techron fuel system cleaner. I usually dont believe in these things but i guess why not.
Question:
What motors mount would you recommend. From past experiences the only motor mounts ive done were upgraded 80a+ duro on my speed 3 which allowed every possible vibration into the cabin.
Question:
What motors mount would you recommend. From past experiences the only motor mounts ive done were upgraded 80a+ duro on my speed 3 which allowed every possible vibration into the cabin.
#6
Forum Administrator
iTrader: (2)
Just to clarify your original post, you're getting vibrations when you are on the brakes and you are slowing the car down (while driving at speed)?
#7
Thanks for the input. I am going to give the MAF a proper cleaning again with a 30 minute ECU reset. I also added a bottle of techron fuel system cleaner. I usually dont believe in these things but i guess why not.
Question:
What motors mount would you recommend. From past experiences the only motor mounts ive done were upgraded 80a+ duro on my speed 3 which allowed every possible vibration into the cabin.
Question:
What motors mount would you recommend. From past experiences the only motor mounts ive done were upgraded 80a+ duro on my speed 3 which allowed every possible vibration into the cabin.
Trending Topics
#8
I had this exact vibration on my 03 when I first bought it, if you search you will find my post regarding it. I got all the same suggestions you are getting now--it was none of them.
Open the hood and have someone sit in the car with their foot on the brake and the car in "D". BE VERY CAREFUL! Stand off to the passenger side so you don't get run over. Reach in and feel the engine cover, If it's the same as mine you will have found your vibration. I don't know the name of it or what exactly it does, but on the passenger side of the engine there is a black box with a vacuum tube or two (if memory serves me) coming out of it. You will see it clearly once you remove the engine cover and you can feel it vibrating.
If you are with me so far, and your car is the same as mine, you have found the issue. At this point i turned the engine cover over. You will see that in addition to the mounting posts and clips the cover also has an "eggcrate" type insulation that comes down and touches the part that is vibrating. I took a razor and cut 1/2" off the insulation so the cover no longer makes contact and the problem was solved.
When I searched for an answer to my problem I saw that many people from all across the Lexus lineup have complained about this strange vibration, so you are not alone. I have no idea why some cars do it and others don't. I checked all the mounting bolts and could find nothing loose which would cause a vibration. Again, if I touched the intake manifold at the same time it is as vibration free as my LS400. Hope this helps!
Open the hood and have someone sit in the car with their foot on the brake and the car in "D". BE VERY CAREFUL! Stand off to the passenger side so you don't get run over. Reach in and feel the engine cover, If it's the same as mine you will have found your vibration. I don't know the name of it or what exactly it does, but on the passenger side of the engine there is a black box with a vacuum tube or two (if memory serves me) coming out of it. You will see it clearly once you remove the engine cover and you can feel it vibrating.
If you are with me so far, and your car is the same as mine, you have found the issue. At this point i turned the engine cover over. You will see that in addition to the mounting posts and clips the cover also has an "eggcrate" type insulation that comes down and touches the part that is vibrating. I took a razor and cut 1/2" off the insulation so the cover no longer makes contact and the problem was solved.
When I searched for an answer to my problem I saw that many people from all across the Lexus lineup have complained about this strange vibration, so you are not alone. I have no idea why some cars do it and others don't. I checked all the mounting bolts and could find nothing loose which would cause a vibration. Again, if I touched the intake manifold at the same time it is as vibration free as my LS400. Hope this helps!
Last edited by midwest2; 02-18-14 at 06:05 PM.
#10
#11
Yep same issue. It was smooth when the engine wasn't loaded like in neutral but will vibrate through steering and floorboard/center console when in gear and idling (fully warmed up). It bugged the crap out of me since my cheap $16k Honda fit actually idled quieter and smoother then my $70k LS.
#14
#15
Driver School Candidate
Thread Starter
Yep same issue. It was smooth when the engine wasn't loaded like in neutral but will vibrate through steering and floorboard/center console when in gear and idling (fully warmed up). It bugged the crap out of me since my cheap $16k Honda fit actually idled quieter and smoother then my $70k LS.
When in drive, under load w/foot on brake, then i noticed some vibrations. like a 3/10
Maybe i need to lower expectation, lol after all there has to be some vibrations right?
That side-by-side picture truly says a lot. I so am used to a visual inspection on these rubber mounts in which you could see that it cracked, warped heavily or in cases of hydraulic filled, leaking everywhere. But most people would just pass it by and not notice.
Thread
Thread Starter
Forum
Replies
Last Post
AuttiMan
LS - 3rd Gen (2001-2006)
5
12-03-14 08:49 AM