Blown
#1
Driver School Candidate
Thread Starter
Join Date: Aug 2003
Location: Mississippi
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Blown
Okay before anyone says I am crazy, my shrink already said that. I just got home from a business meeting and on the way home a few of us were racing. Since I knew we would be racing I took my '93 LS and as we reaching speeds between 125-135 my head gasket blew . Everyone thought the car was on fire !!!! I am going to get this car back on the road a.s.a.p. it is faster than the '96 & '98 LS's. I said all that to say this the car has 250,000 miles on it are there any suggestions as to anything else to do to the car while I have the heads off. Nothing extravagant like F.I. but anything else goes.
Shane
Shane
#2
3UZ-FEEEE
iTrader: (2)
Sorry to hear about your head gasket, but I don’t get how its faster? What have you done to it? According to your sig, its stock, so either you broke the laws of phsyics or you were very drunk jk.
I think your so excited you didn’t re-read your post after your wrote it, a very familiar feeling
I think your so excited you didn’t re-read your post after your wrote it, a very familiar feeling
#3
Search Function Inc.
Unless you have done some serious mods to it, it won't be faster then '98 model. That is unless they hit their speed limiter which you do not have in your car.
#4
Lead Lap
iTrader: (3)
Yeah what they said!!!!! I just got dusted by a gen3 LS that was loaded with people. With the gen3 your looking at an increase of at least 20 HP and I think even a 5th gear. But back to the original QUESTION how about a port & polish! my knowledge on this subject is very limited, but you can find tons of info on it at lextreme.com or maybe here on this site in the (gen1)SC forum. Ihave also seen 5.0 liter engine upgrade kits in hyper-rev magazine again a subject that I have limited knowledge on, but you may want to look into it.
#5
3UZ-FEEEE
iTrader: (2)
Originally Posted by sonbum1
Yeah what they said!!!!! I just got dusted by a gen3 LS that was loaded with people. With the gen3 your looking at an increase of at least 20 HP and I think even a 5th gear. But back to the original QUESTION how about a port & polish! my knowledge on this subject is very limited, but you can find tons of info on it at lextreme.com or maybe here on this site in the (gen1)SC forum. Ihave also seen 5.0 liter engine upgrade kits in hyper-rev magazine again a subject that I have limited knowledge on, but you may want to look into it.
#7
Driver School Candidate
Thread Starter
Join Date: Aug 2003
Location: Mississippi
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Well it's not stock any longer. I just forgot to change my sig, sorry, but I do have to agree I didn't see why it would blow the head gasket. Until today, the inside of this engine is covered in gunk. It is clear that the previous owner didn't take care of this car at all in moe ways than one, such as paint, seats, carpets, wheels(peeling), and widows cracked. I honestly do not see how this car ran as good as it did all I can say is after I get it back together it will be worth the trouble.
If the 98 is supposed to be faster maybe I should have it checked out, because after four passes the 93 won 4 out of 4. All I have done to the 93 is exhaust, ignition, air filter, and new fuel pump\w filters. I appreciate all the help and input!!
If the 98 is supposed to be faster maybe I should have it checked out, because after four passes the 93 won 4 out of 4. All I have done to the 93 is exhaust, ignition, air filter, and new fuel pump\w filters. I appreciate all the help and input!!
Trending Topics
#8
3UZ-FEEEE
iTrader: (2)
Originally Posted by lilmac
Well it's not stock any longer. I just forgot to change my sig, sorry, but I do have to agree I didn't see why it would blow the head gasket. Until today, the inside of this engine is covered in gunk. It is clear that the previous owner didn't take care of this car at all in moe ways than one, such as paint, seats, carpets, wheels(peeling), and widows cracked. I honestly do not see how this car ran as good as it did all I can say is after I get it back together it will be worth the trouble.
If the 98 is supposed to be faster maybe I should have it checked out, because after four passes the 93 won 4 out of 4. All I have done to the 93 is exhaust, ignition, air filter, and new fuel pump\w filters. I appreciate all the help and input!!
If the 98 is supposed to be faster maybe I should have it checked out, because after four passes the 93 won 4 out of 4. All I have done to the 93 is exhaust, ignition, air filter, and new fuel pump\w filters. I appreciate all the help and input!!
#9
Lexus Test Driver
its physically impossible for the 3rd gen LS to lose against a stock 1st gen LS.. but I'll take your word for it.. maybe the car's ECU kicked in.. or maybe the driver was just horrible and didnt know how to race an automatic.. LOL..
but who cares.. yo u still dusted the 3rd gen LS with fashion... good luck on getting the car back on the road.
but who cares.. yo u still dusted the 3rd gen LS with fashion... good luck on getting the car back on the road.
#10
Search Function Inc.
I still doubt that this would happen with the mods you have listed. With all the fuel mods I would assume that injectors would have to be changed also. I know exactly how 1st gen LS runs with intake and exhaust and it is still a lot slower then stock 3rd gen. Maybe something was wrong with the car you have raced.
#11
Dysfunctional Veteran
if you blew both of them i would say a head rebuild since you have it fof. if you feel like taking both of them off, do a Port and Polish (good for 40 HP for $400) and rebuild them with new valves, seats, springs biuckets and shims, and seals of course. then install a thinner, metal head gasket to raise compression.
#12
Instructor
iTrader: (4)
lol thats kind of funny. I had a great running 91 LS with a new engine (50-60K, retros old engine), with a TORQUE CONVERTER, intake, and exhaust. I can tell you right now that I know for a FACT that a stock 98 LS runs CIRCLES around my 91 LS which I am sure was a lot faster than lilmac's. I know this for a fact because I own a 99 LS and it was fast stock, now with a torque converter is beats my moms 745li easily 0-60.
#13
Driver School Candidate
Thread Starter
Join Date: Aug 2003
Location: Mississippi
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Okay I'll definitely get the *'99* checked out because I bought all these cars used I only have the word of the seller as to what service was done on the cars. I agree I thought the '99 would be faster, but I assumed the '92 had something done to it like a converter (the throttle is extremely touchy just one tap and it picks up and screams) plus if you floor it the car goes just past redline in every gear. But after reading what Jasoneo5 said a T/C can't be the reason. Also it is just the pass. side head gasket, and so far it looks like we will be pulling the other head to get this engine hitting a little harder.
My business partner is seeling his 745Li in June can someone put me onto some good sites for this car. One part of me says buy it, BuY iT, BUY IT, and the other part says how can you justify it? I guess we'll see what happens in about 6-7 weeks!
A side note but it proves you can get crazy stuff without knowing: My fast '02 dually burned the converter(was expecting this-NOS) a few weeks ago and I went to a local shop and bought an entire tranny with converter. After getting it home I really checked what I had, and verifying everything, it was a Suncoast Tripple-Lock converter!!!!!
And I want to say Thanks for all the response
My business partner is seeling his 745Li in June can someone put me onto some good sites for this car. One part of me says buy it, BuY iT, BUY IT, and the other part says how can you justify it? I guess we'll see what happens in about 6-7 weeks!
A side note but it proves you can get crazy stuff without knowing: My fast '02 dually burned the converter(was expecting this-NOS) a few weeks ago and I went to a local shop and bought an entire tranny with converter. After getting it home I really checked what I had, and verifying everything, it was a Suncoast Tripple-Lock converter!!!!!
And I want to say Thanks for all the response
Last edited by lilmac; 04-05-05 at 11:02 PM. Reason: I typed 98 instead of 99 on all my post
Thread
Thread Starter
Forum
Replies
Last Post
Paulus
Performance & Maintenance
4
10-13-05 12:21 AM