95 Ls400 Headlight aim
#1
Pole Position
Thread Starter
95 Ls400 Headlight aim
I need to adjust the headlight aim on my 1995 LS400. I can't seem to find the screws used to adjust the aim. Somehow, I need to raise my fog lamps a bit, but I also need to dip my low beams a bit. But the whole unit is one, unlike the Gen 1 LS400 (two units), which is easier to adjust independently!!! I checked all the bulbs, it's not like one of them had popped out of the socket, or that the filament was deformed. The bulbs are fine. Anyway, first things first, can anyone tell me how to adjust the beam? Thanks in advance.
I need help soon, I am not blinding the oncoming driver, but I do give him a bad glare.
I need help soon, I am not blinding the oncoming driver, but I do give him a bad glare.
Last edited by ychachad; 10-12-04 at 11:28 AM.
#2
Pole Position
Thread Starter
For your information, several sites like Sylvania, Advance Autoparts etc. list that the low beam lamp for the 1995 LS400 is a 9006. THIS IS NOT CORRECT!!! The correct low beam for the machine is a hi/lo combination bulb type H4 as stated in the owner's manual.
#5
VIP|EXEstyle セルシオ
iTrader: (3)
Originally Posted by UCF20
hmm i have an HID kit on mine 96LS, and the rightside is a little bit higher then left, is this correctable?
#7
Pole Position
Thread Starter
Great news PD, I am anxiously waiting for your post.
Originally Posted by PureDrifter
WOO!!
i figured out how to do it. took some pics of the screws and once i get some time to edit the pics il put them up as a tutorial. and FYI, on my car, the right side was MUCH lower than the left o.O
i figured out how to do it. took some pics of the screws and once i get some time to edit the pics il put them up as a tutorial. and FYI, on my car, the right side was MUCH lower than the left o.O
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
KC98LS
LS - 1st and 2nd Gen (1990-2000)
12
12-18-20 09:42 AM
motorscape
LS - 1st and 2nd Gen (1990-2000)
6
07-19-12 03:31 PM
udontknow
LS - 1st and 2nd Gen (1990-2000)
18
07-13-06 09:56 AM