LS - 3rd Gen (2001-2006) Discussion topics related to the flagship Lexus LS430

Bettery got flat - engine light appeared

Thread Tools
 
Search this Thread
 
Old 01-30-11, 11:55 PM
  #1  
Twix
Pole Position
Thread Starter
 
Twix's Avatar
 
Join Date: Sep 2008
Location: Johannesburg, South Africa
Posts: 225
Likes: 0
Received 2 Likes on 2 Posts
Default Bettery got flat - engine light appeared

Hi guys,
I went on a 10 day trip and left the car in the garage and accidently left it on "ON" position (smart access)...

When I got back the car battery was flat empty...I jumped it and it started...drew it around and the battery seems fine now but the engine icon appeared on the dash...
I tried removing the negative for 10 mins to try to reset, and it's ok for around 15 mins after (no icon) but then it appears again

Any ideas what can I do, or what could be wrong (before this I never had an engine light on)...
Old 01-31-11, 02:49 AM
  #2  
VNN326
Lexus Champion
iTrader: (21)
 
VNN326's Avatar
 
Join Date: Oct 2007
Location: SoCALi
Posts: 2,585
Received 5 Likes on 4 Posts
Default

you should use a obd2 scanner and scan for the code to see whats worng. could be anything.
Old 02-03-11, 08:18 PM
  #3  
Twix
Pole Position
Thread Starter
 
Twix's Avatar
 
Join Date: Sep 2008
Location: Johannesburg, South Africa
Posts: 225
Likes: 0
Received 2 Likes on 2 Posts
Default

I'm thinking of buying TOYOTA K+CAN commander 2.0
Will that help me do a diagnostic and reset error code(s)?

I would rather get a tool my self then go to dealer
Old 02-06-11, 09:22 PM
  #4  
Twix
Pole Position
Thread Starter
 
Twix's Avatar
 
Join Date: Sep 2008
Location: Johannesburg, South Africa
Posts: 225
Likes: 0
Received 2 Likes on 2 Posts
Default

Anyone? (what do you guys use for DIY diagnostic/fault clearing...)
Old 02-07-11, 08:16 AM
  #5  
jimbosr1
Racer
 
jimbosr1's Avatar
 
Join Date: Sep 2010
Location: GA
Posts: 1,977
Received 146 Likes on 115 Posts
Default

in the states you can go to any major autoparts store and they will hook up to your computer and give you the code free.may do it where you live
Old 02-07-11, 09:43 AM
  #6  
jac430
Driver
 
jac430's Avatar
 
Join Date: Jan 2011
Location: Netherlands
Posts: 163
Likes: 0
Received 0 Likes on 0 Posts
Default TOYOTA K+CAN commander 2.0

Originally Posted by Twix
I'm thinking of buying TOYOTA K+CAN commander 2.0
Will that help me do a diagnostic and reset error code(s)?

I would rather get a tool my self then go to dealer
I admit that I thought about it also.
Would it be possible with this device to set the customization items that in principle only the dealer can do?

No one any experience with this?? Or heard of it?

For the amount of money this device costs, it is no problem to just buy and try.
But I am a bit scared to **** up my precious LS430....

Thanks for any help!

Jac
Old 02-07-11, 11:05 AM
  #7  
SRI
Rookie
 
SRI's Avatar
 
Join Date: Dec 2006
Location: FL
Posts: 63
Likes: 0
Received 0 Likes on 0 Posts
Default

OBD II scan tool availability, varies by country.

AFAIK ---The TOYOTA K+CAN commander 2.0, is not widely available in the USA.

Do-It- Yourself type car owners, use brands like Actron, Eqqus, Autoxray, Autel and many more.

I use an Actron model.

Professionals use brands like OTC, Snap On and the other proprietary tools from the manufacturer ( read $$$$).

A simple, basic, stand alone model would do for occasional use.

There are plenty to choose from - like standalone, laptop based, smart phone based and portable GPS system based( a few months back, Garmin introduced ecoRoute, which is a real time OBD II tool).

I may not have given a direct answer to your question , but I would suggest checking the user reviews and sales rank in Amazon, and if the product has good reviews and available locally, then make the purchase decision.

Last edited by SRI; 02-07-11 at 03:45 PM.
Old 02-07-11, 12:27 PM
  #8  
Lawrenzo
Driver School Candidate
 
Lawrenzo's Avatar
 
Join Date: Dec 2008
Location: TX
Posts: 38
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Twix
Hi guys,
I went on a 10 day trip and left the car in the garage and accidently left it on "ON" position (smart access)...

When I got back the car battery was flat empty...I jumped it and it started...drew it around and the battery seems fine now but the engine icon appeared on the dash...
I tried removing the negative for 10 mins to try to reset, and it's ok for around 15 mins after (no icon) but then it appears again

Any ideas what can I do, or what could be wrong (before this I never had an engine light on)...
From my experience:

You will most likely need a new battery. It doesn't matter how charged that battery is. I drained my battery overnight and no matter how much I charged the battery, I would get TCS/Check Engine/Etc. lights. My nav wouldn't function properly.

Someone on a similar thread (don't remember where it was) stated that the LS runs on a lot of electronics and has a lot of mini computers that functions sensors and accessories. Even if the battery gets the car to start up, if it's been drained once and is not sending the proper voltage to the sensors, the warning lights will falsely turn on.

The only way I was able to get rid of those lights was to change it out with a BRAND NEW battery. After that, all the lights disappeared. This has happened to me twice.

First time was with a battery that was on it's last legs. The dealer tried to blame it on a module I had hooked up to my car and refused to change the battery UNDER WARRANTY. I took the car home, changed the battery myself and PRESTO. All the lights were gone.

The second time I recognized the signs of my lights going off and my nav and bluetooth not working properly. Took my warrantied battery to Interstate and they determined it was a faulty battery. Changed it out and PRESTO, the lights and electronics started functioning properly again.

Again, this is just my experience.

Out of curiosity, what model/package is your LS?
Old 02-08-11, 03:26 AM
  #9  
Twix
Pole Position
Thread Starter
 
Twix's Avatar
 
Join Date: Sep 2008
Location: Johannesburg, South Africa
Posts: 225
Likes: 0
Received 2 Likes on 2 Posts
Default

It's an 2001 LS430, but not UL package (I know that cause my rear seats don't have buttons to move, and in the rear center console you can only switch off/on seat heaters)...

I actually don't know, maybe a standard package...
I have seat heaters (front and rear), pioneer audio (no navi) with 6 CD changer, smart access (small plastic dongle - no key), doors close automaticaly if you don't close them all the way...

I don't know what are the differences in packages so I can't say... :S
Is there a list or something I can compare to (remember this is a RHD market, so it is a bit different then USA)?
Old 02-08-11, 06:07 AM
  #10  
Twix
Pole Position
Thread Starter
 
Twix's Avatar
 
Join Date: Sep 2008
Location: Johannesburg, South Africa
Posts: 225
Likes: 0
Received 2 Likes on 2 Posts
Default

Whow...just got back from the dealer...
They reset the code, but it reappeared...

The code says that the Bank2 - Sensor 1 is bad (doe on the computer the values change as the car works)

Is there a way to repair the sensor, maybe clean it or must it be replaced?
Old 02-08-11, 03:08 PM
  #11  
SRI
Rookie
 
SRI's Avatar
 
Join Date: Dec 2006
Location: FL
Posts: 63
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Twix
The code says that the Bank2 - Sensor 1 is bad (doe on the computer the values change as the car works)

Is there a way to repair the sensor, maybe clean it or must it be replaced?
1.LS430 FAQ sticky thread on top has info on Oxygen sensor install tips.

2. Here is another:
https://www.clublexus.com/forums/ls4...ensor-1-a.html

3.Many more in other Lexus model forums too (not of direct use for LS430, but somewhat relevant).
Old 02-13-11, 07:47 AM
  #12  
Twix
Pole Position
Thread Starter
 
Twix's Avatar
 
Join Date: Sep 2008
Location: Johannesburg, South Africa
Posts: 225
Likes: 0
Received 2 Likes on 2 Posts
Default

Ok, to end it all

I went to the dealer and they didn't charge me to do diagnostic, so the error code popped out : P0155 - bank 2 sensor 1

They gave me a quote for the new sensor :
(I converted from South African Rand to US$)
- O2 sensor = ~ $250
- hour labor = ~ $85

Total of ~ $335

I went to Bosch and got an universal O2 sensor for Lexus (compatible with LS430) for ~ $105, and straight to my friends car shop (he has a car lift/jack) so I did all my self

Sensor 1 is not as easy as sensor 2, but it can be done by an amateur...took me around 45mins...

Once done, no more engine code!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
karan1193
IS - 2nd Gen (2006-2013)
1
01-07-15 08:33 PM
adi
RX - 1st Gen (1999-2003)
9
10-03-10 07:19 PM
GOLDSc300
Maintenance
6
04-15-07 07:32 AM
Dj Matt
LS - 1st and 2nd Gen (1990-2000)
3
10-19-06 02:56 AM
richma7175
ES - 1st to 4th Gen (1990-2006)
7
08-10-03 07:54 PM



Quick Reply: Bettery got flat - engine light appeared



All times are GMT -7. The time now is 10:38 AM.