Traction control light issue.
06-05-14, 06:40 PM
#1
Pole Position
Thread Starter
iTrader: (1)
Join Date: Feb 2011
Location: AZ
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Traction control light issue.
So having an odd issue. Installed headers, and now have a traction control light on. No cel, no vsc etc just the traction control(skidding car) light.
If I hold down the traction button nothing happens.
Already reset the ecu with no change.
One thing after we put the car back together the steering wheel was crooked so we had to throw it back up to straighten the steering linkage(despite our mark lining up). Would the front wheels turning while the car was in the air have any effect?
If I hold down the traction button nothing happens.
Already reset the ecu with no change.
One thing after we put the car back together the steering wheel was crooked so we had to throw it back up to straighten the steering linkage(despite our mark lining up). Would the front wheels turning while the car was in the air have any effect?
06-06-14, 09:39 AM
#2
Tech Info Resource
iTrader: (2)
Yes. VSC is aware of the wheel position - it is an input to the VDIM, and the steering rack will compensate for you.
Thread
Thread Starter
Forum
Replies
Last Post