isf gear ratio?anyone know the top speed per gear?
#2
With a 6800 RPM redline, 255/35R19 rear tires, and a 2.94:1 final drive axle ratio, the theoretical redline-limited top speed in each gear is as follows:
1st - 4.60:1 - 38 mph
2nd - 2.72:1 - 65 mph
3rd - 1.86:1 - 96 mph
4th - 1.46:1 - 122 mph
5th - 1.23:1 - 145 mph
6th - 1.00:1 - 179 mph
7th - 0.82:1 - 218 mph
8th - 0.69:1 - 259 mph
rev - 2.18:1 - 82 mph
1st - 4.60:1 - 38 mph
2nd - 2.72:1 - 65 mph
3rd - 1.86:1 - 96 mph
4th - 1.46:1 - 122 mph
5th - 1.23:1 - 145 mph
6th - 1.00:1 - 179 mph
7th - 0.82:1 - 218 mph
8th - 0.69:1 - 259 mph
rev - 2.18:1 - 82 mph
#6
Pole Position
Thread Starter
so basically on flat out....7th and 8th gear will never be used? only for city driving to conserve gas?
i was wondering if there are any final ring gear mods so the top speed per gear can be adjusted so we can use all gears ..... but from what i read and watched,changing to 4.0 final ring gear will have a speed cut on 120mph?
i was wondering if there are any final ring gear mods so the top speed per gear can be adjusted so we can use all gears ..... but from what i read and watched,changing to 4.0 final ring gear will have a speed cut on 120mph?
Last edited by Ltaboso; 01-19-15 at 10:30 PM.
#7
so basically on flat out....7th and 8th gear will never be used? only for city driving to conserve gas?
i was wondering if there are any final ring gear mods so the top speed per gear can be adjusted so we can use all gears ..... but from what i read and watched,changing to 4.0 final ring gear will have a speed cut on 120mph?
i was wondering if there are any final ring gear mods so the top speed per gear can be adjusted so we can use all gears ..... but from what i read and watched,changing to 4.0 final ring gear will have a speed cut on 120mph?
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post