IS - 2nd Gen (2006-2013) Discussion about the 2006+ model IS models

Led problem

Thread Tools
 
Search this Thread
 
Old 10-20-12, 01:55 PM
  #1  
my1s250
Lead Lap
Thread Starter
iTrader: (1)
 
my1s250's Avatar
 
Join Date: Jan 2011
Location: tx
Posts: 480
Likes: 0
Received 0 Likes on 0 Posts
Default Led problem

I have the ijdmtoy perfect fit led for interior ... I have both install but for some reason the back doesn't turn on wayne I open the door.
Old 10-20-12, 02:14 PM
  #2  
imherenow
Racer
 
imherenow's Avatar
 
Join Date: Aug 2005
Location: TX, CA
Posts: 1,754
Received 9 Likes on 9 Posts
Default

did you try flipping sides??they have to be with right polarity for it to work. Or you could have blown fuse. check to make sure the fuse are working
Old 10-20-12, 04:49 PM
  #3  
es808
Pole Position
iTrader: (32)
 
es808's Avatar
 
Join Date: Feb 2010
Location: SoCal
Posts: 382
Received 2 Likes on 2 Posts
Default

Yes...try flipping it. LED bulbs are polarity dependent. If you put them in one way and they don't work, flip them and try again. Otherwise look at the wires on the bulb and make sure that they're straight and making contact with the electrical socket blades.

Good luck!
Old 10-20-12, 07:58 PM
  #4  
my1s250
Lead Lap
Thread Starter
iTrader: (1)
 
my1s250's Avatar
 
Join Date: Jan 2011
Location: tx
Posts: 480
Likes: 0
Received 0 Likes on 0 Posts
Default

Yes they both light up when I open the door , but when unlock the door only the rear light up...
Old 10-20-12, 09:21 PM
  #5  
es808
Pole Position
iTrader: (32)
 
es808's Avatar
 
Join Date: Feb 2010
Location: SoCal
Posts: 382
Received 2 Likes on 2 Posts
Default

For the front overhead lights, is the button marked "door" pushed in? Maybe you pushed it while you were changing the bulbs...
Old 10-20-12, 09:31 PM
  #6  
CLIS250
Pole Position
iTrader: (4)
 
CLIS250's Avatar
 
Join Date: Dec 2008
Location: NorCal
Posts: 347
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by es808
For the front overhead lights, is the button marked "door" pushed in? Maybe you pushed it while you were changing the bulbs...
doesnt the front door button control both the front and rear domes? thats how it is for mine.
Old 10-20-12, 09:35 PM
  #7  
my1s250
Lead Lap
Thread Starter
iTrader: (1)
 
my1s250's Avatar
 
Join Date: Jan 2011
Location: tx
Posts: 480
Likes: 0
Received 0 Likes on 0 Posts
Default

everything is working fine just when you unlock the door the front and back supposed to light up but for some reason the rear only light up ....
Old 10-20-12, 09:36 PM
  #8  
es808
Pole Position
iTrader: (32)
 
es808's Avatar
 
Join Date: Feb 2010
Location: SoCal
Posts: 382
Received 2 Likes on 2 Posts
Default

I think they do but I'm just having him try something. It's a little confusing about what exactly is going on since they both light up when the door is opened.

my1s250, when you say "unlock the door only the rear light up" you're unlocking the doors and not opening them? Or you're opening the rear doors only? Please explain....
Old 10-20-12, 10:22 PM
  #9  
my1s250
Lead Lap
Thread Starter
iTrader: (1)
 
my1s250's Avatar
 
Join Date: Jan 2011
Location: tx
Posts: 480
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by es808
I think they do but I'm just having him try something. It's a little confusing about what exactly is going on since they both light up when the door is opened.

my1s250, when you say "unlock the door only the rear light up" you're unlocking the doors and not opening them? Or you're opening the rear doors only? Please explain....
Yes exactly just unlock with all door still closed
Old 10-20-12, 10:37 PM
  #10  
neomedic
Pole Position
iTrader: (5)
 
neomedic's Avatar
 
Join Date: Sep 2010
Location: CA
Posts: 384
Likes: 0
Received 0 Likes on 0 Posts
Default

I also notice this issue with ijdmtoy leds for my Audi S4. I then switched over to VLEDs. The problem is gone. So I think it's the LEDs. Now I run VLEDs on both my Audi and IS350. Having seen both types of light...subjectively I feel VLEDs are of better quality.

Good Luck
Old 10-20-12, 10:38 PM
  #11  
CLIS250
Pole Position
iTrader: (4)
 
CLIS250's Avatar
 
Join Date: Dec 2008
Location: NorCal
Posts: 347
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by neomedic
I also notice this issue with ijdmtoy leds for my Audi S4. I then switched over to VLEDs. The problem is gone. So I think it's the LEDs. Now I run VLEDs on both my Audi and IS350. Having seen both types of light...subjectively I feel VLEDs are of better quality.

Good Luck
Agreed May cost a little more, but running JLC and VLED's on my cars.
Old 10-21-12, 01:08 AM
  #12  
ISCjonny
Racer
iTrader: (7)
 
ISCjonny's Avatar
 
Join Date: Jun 2007
Location: California - Bay Area
Posts: 1,305
Likes: 0
Received 2 Likes on 2 Posts
Default

you have 3 194 bulb sockets on the front dome... which one did you plug into? If i remember correctly from my sedan days, tap the middle one. When you unlock the doors only the middle bulb turns on. When you open the doors, all 3 turn on. Same thing for the back dome lights.. there are 2 festoon sockets. 1 turns on when you unlock, and both turn on when the doors are open.

Hope that helps.
Old 10-21-12, 12:11 PM
  #13  
my1s250
Lead Lap
Thread Starter
iTrader: (1)
 
my1s250's Avatar
 
Join Date: Jan 2011
Location: tx
Posts: 480
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by ISCjonny
you have 3 194 bulb sockets on the front dome... which one did you plug into? If i remember correctly from my sedan days, tap the middle one. When you unlock the doors only the middle bulb turns on. When you open the doors, all 3 turn on. Same thing for the back dome lights.. there are 2 festoon sockets. 1 turns on when you unlock, and both turn on when the doors are open.

Hope that helps.
Yes!!!! That help a lot everything is working as it should now
Front led should ve in the middle socket and rear should be the socket toward the front...
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
NotFasty
LS - 4th Gen (2007-2017)
8
12-17-18 12:57 PM
akoster
IS - 2nd Gen (2006-2013)
2
03-10-18 09:55 AM
imherenow
ES - 1st to 4th Gen (1990-2006)
41
10-14-13 02:51 PM
potatoman
ES - 1st to 4th Gen (1990-2006)
10
01-06-11 12:07 PM
mpcguru
Lighting
4
07-27-04 12:25 PM



Quick Reply: Led problem



All times are GMT -7. The time now is 12:50 AM.