2003 GX 470 V-Belt Tensioner Replacement?
#1
Driver School Candidate
Thread Starter
Join Date: Jun 2014
Location: CA
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
2003 GX 470 V-Belt Tensioner Replacement?
I just received a Gates serpentine V-Belt replacement kit I purchased from RockAuto. It includes a new V-belt, belt tensioner and idler #2 pulley. I see that the belt tensioner bolt on the bottom appears to be blocked by the generator mount. Do I have to remove the generator just to replace the drive belt tensioner?
The parts diagram in the repair manual (CD) page 14-19 only shows a bolt and two nuts securing it. There are 4 holes for bolts on the new tensioner provided in the kit. There are no tensioner replacement instructions included or in the Lexus service manual. The radiator hose is already a pain to work around. Removing the generator to get to the lower bolt would be another added task.
It seems to this job easily, I would have to drain the coolant to remove the radiator hose as well. Is replacing the tensioner really necessary when the belt is changed. I am already second guessing the belt replacement as there are no major cracks in the belt, just minor age cracks with no chunks missing on the V-grooved side. The vehicle has 104,000 miles on it.
The parts diagram in the repair manual (CD) page 14-19 only shows a bolt and two nuts securing it. There are 4 holes for bolts on the new tensioner provided in the kit. There are no tensioner replacement instructions included or in the Lexus service manual. The radiator hose is already a pain to work around. Removing the generator to get to the lower bolt would be another added task.
It seems to this job easily, I would have to drain the coolant to remove the radiator hose as well. Is replacing the tensioner really necessary when the belt is changed. I am already second guessing the belt replacement as there are no major cracks in the belt, just minor age cracks with no chunks missing on the V-grooved side. The vehicle has 104,000 miles on it.
#2
Instructor
I would just change the belt and keep the other parts in the event of failure, which unlike the TB belt wouldn't hurt anything.
Thread
Thread Starter
Forum
Replies
Last Post
ancdmd
LS - 3rd Gen (2001-2006)
1
04-16-16 07:03 AM
avalon42
LS - 1st and 2nd Gen (1990-2000)
5
03-09-08 06:02 PM