Bank 1 sensor 1 and bank 1 sensor 2 help
#1
Driver School Candidate
Thread Starter
Join Date: Mar 2013
Location: MD
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Bank 1 sensor 1 and bank 1 sensor 2 help
Help...
Can anyone help me with the location of bank 1 sensor 1 and bank 1 sensor 2 on a 2003 gs300. Looking for any info... Denso part numbers, upstream down etc... The error code for the bank 1 sen 1 was p0031 and the code for bank 1 sensor 2 is p0037
Thanks again
Can anyone help me with the location of bank 1 sensor 1 and bank 1 sensor 2 on a 2003 gs300. Looking for any info... Denso part numbers, upstream down etc... The error code for the bank 1 sen 1 was p0031 and the code for bank 1 sensor 2 is p0037
Thanks again
#2
Lead Lap
iTrader: (1)
They're in the exhaust.
Did you try Google? I just took 2 seconds to type "gs300 bank 1 sensor 2" into Google and the very first result was a "how to" thread on this very forum. https://www.clublexus.com/forums/mai...ode-p0141.html
The diagram in that thread should be all the info you need to replace both sensors.
Put your flame suit on....
Did you try Google? I just took 2 seconds to type "gs300 bank 1 sensor 2" into Google and the very first result was a "how to" thread on this very forum. https://www.clublexus.com/forums/mai...ode-p0141.html
The diagram in that thread should be all the info you need to replace both sensors.
Put your flame suit on....
Last edited by mk2tmr2; 03-11-13 at 09:50 AM.
#3
They're in the exhaust.
Did you try Google? I just took 2 seconds to type "gs300 bank 1 sensor 2" into Google and the very first result was a "how to" thread on this very forum. https://www.clublexus.com/forums/mai...ode-p0141.html
The diagram in that thread should be all the info you need to replace both sensors.
Put your flame suit on....
Did you try Google? I just took 2 seconds to type "gs300 bank 1 sensor 2" into Google and the very first result was a "how to" thread on this very forum. https://www.clublexus.com/forums/mai...ode-p0141.html
The diagram in that thread should be all the info you need to replace both sensors.
Put your flame suit on....
#6
Did you just pry up the door sill with a screw driver to get under the carpet?
Thread
Thread Starter
Forum
Replies
Last Post