Insurance taillights issue help!
#1
Lexus Test Driver
Thread Starter
iTrader: (7)
Join Date: Mar 2009
Location: Southern CA, 714
Posts: 1,510
Likes: 0
Received 0 Likes
on
0 Posts
Insurance taillights issue help!
Hello,
I recently got a set and it and when i installed it. I think it blew my brakes fuse. I put back my OEMs and its still the same.
My light would turn on, but when i press my brakes... It won't go off. Could it be the resistors that comes with it and is over loading my modular.
My lights have three plugs; one to the main tail-lamp socket and the other two to the resistors. So, does the LEDs have too much power for the main socket?
Anyone else with Insurance taillights having this problem?
I recently got a set and it and when i installed it. I think it blew my brakes fuse. I put back my OEMs and its still the same.
My light would turn on, but when i press my brakes... It won't go off. Could it be the resistors that comes with it and is over loading my modular.
My lights have three plugs; one to the main tail-lamp socket and the other two to the resistors. So, does the LEDs have too much power for the main socket?
Anyone else with Insurance taillights having this problem?
#4
When you press on the brakes, it won't go off? That's because you're pressing on it?
I don't think you should use a higher fuse, you'll burn your wiring up that way for sure. There's this little button behind your brake peddle, see if it comes back out when you let go of the brakes. Check all your taillight fuse.
I don't think you should use a higher fuse, you'll burn your wiring up that way for sure. There's this little button behind your brake peddle, see if it comes back out when you let go of the brakes. Check all your taillight fuse.
Trending Topics
#10
Lead Lap
iTrader: (32)
I just got mine and it worked fine for a few days. My fuse blew, so I replaced it and worked fine. Then the parking lights would not come on, but when I stepped on the brakes, it worked. I couldnt drive it at night cuz parking lights wouldnt come on. It also messed up my the sensor? (small black box inside left trunk handle) Maybe we need to swap the resistors?
#14
Lexus Test Driver
Thread Starter
iTrader: (7)
Join Date: Mar 2009
Location: Southern CA, 714
Posts: 1,510
Likes: 0
Received 0 Likes
on
0 Posts
Chris4.3 - i think i might have seen your car pulling out near my work every morning. Off el camino. I work at the office buildings right behind baby r us.
i've seen a black GS with insurance taillights. i always wonder who could that be.
Anyways,
what i did was... just took off the resistors box... And it worked perfect since. no problems.
After that, i rigged the some wiring so i won't be able to see the taillight out.
And yes! these taillights are amazing. the quality of it is top notch. not cheap at all.
i've seen a black GS with insurance taillights. i always wonder who could that be.
Anyways,
what i did was... just took off the resistors box... And it worked perfect since. no problems.
After that, i rigged the some wiring so i won't be able to see the taillight out.
And yes! these taillights are amazing. the quality of it is top notch. not cheap at all.