help please!
#1
Driver
Thread Starter
help please!
i sanded my headlights using 500, 800, and 1000 grit sand paper and it looks worse than before. im not good with these polishing/headlight stuff and im wondering if you guys could tell me what i did wrong? what i can do to make it clear again..thanks alot!
#3
Lead Lap
iTrader: (2)
500 grit was too coarse. Try wet sanding with 800, 1000, 1500, 2000 then use a buffing pad/wheel on a high rpm buffer or drill with rubbing compound or meguiars headlight polish (white bottle blue liquid). Follow with a few buffs. Might take a few polishes with the pad to hit it right.
Use light soapy water when wet sanding
Use light soapy water when wet sanding
#5
Driver
Thread Starter
just bought it and tried it out. i guess it works a bit. i used an applicator pad. my friend is gonna come over to buff it out for me with the machine. let's see how it looks...
Thread
Thread Starter
Forum
Replies
Last Post
jpcdmd
Automotive Care & Detailing
288
11-01-22 12:42 PM