kswagner

Front Side Markers went out - Blinker still works properly but the side markers dont. How do you replace these? Also, are these standard bulbs I can get at any aftermarket auto parts dealer?

Thanks

JeffTsai

iTrader: (1)

Yep, it's a standard bulb. It's a 194 to be precise. All modern cars today use that bulb size for all the little aux. lighting.

Bill_GS3

The best way to get to that bulb is through your fog light opening, take out the two screws holding each fog lamp and you're in.

-Bill

kswagner

Thanks for the info - are the two screws for the fogs easy to get at? Sorry if these questions are trivial.....

lexlove

You should easily spot it if you go down and look for a blk screw cause it blend in with the grill.

6HIDsGS300

yup. yup.. so easy to remove.. 'cos somebody swiped my HID foglights

kswagner

Thanks guys - it was easy to remove and easy to replace - but man, they dont put much slack in those wires feeding those side marker sockets. I replaced the passenger side in about 2 seconds but the drives side took awhile b/c of the windshield fluid reservoir. Small hands would be a big help here

cliffud

iTrader: (3)

6hidsgs300 - if you do the HID foglight mod again- make sure you swap out your philips screws for allen wrench screws...

djjt

yup, that's exactly what i did... the first week i had my GS, someone jacked my fog lights lol... so i switched the screws so you'll need a hex key or something...

chinkster

damn you got played!

2FiVE8

i dont know if this is relevant to this thread but i was just wondering is there a different side marker for the aristo compared to the us?? also if not has anyone smoked them or know of a place that sells them smoked, i know there are clear ones available but i kinda wanna keep em orange but with a smoked look. any info would be appreciated

6HIDsGS300

if you want smoke look.. you can try tint it yourself
hmm..not a bad idea actually