Disconnecting the airbag from the sear
#1
Driver School Candidate
Thread Starter
Join Date: Sep 2015
Location: Ontario
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Disconnecting the airbag from the sear
Hey guys
Trying to rip out my passenger seat to fix the leather. Anyone ever disccnnected the airbag without blowing it off? What's the best procedure to disconnecting it whilst avoiding setting it off?
Trying to rip out my passenger seat to fix the leather. Anyone ever disccnnected the airbag without blowing it off? What's the best procedure to disconnecting it whilst avoiding setting it off?
#2
I disconnected a lot of airbags and they never came off.
But if you are afraid, you just disconnect the battery and reconnect it after you finish with your seat.
But if you are afraid, you just disconnect the battery and reconnect it after you finish with your seat.
#3
Driver School Candidate
Thread Starter
Join Date: Sep 2015
Location: Ontario
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
#4
Instructor
(e) Disconnect the negative (-) battery terminal.
CAUTION:
Wait at least 90 seconds after disconnecting the negative (-) battery terminal to prevent the airbag and seat belt
pretensioner from deploying .
(f) Disconnect the connectors under the seat. Then remove the front seat assembly.
CAUTION:
Wait at least 90 seconds after disconnecting the negative (-) battery terminal to prevent the airbag and seat belt
pretensioner from deploying .
(f) Disconnect the connectors under the seat. Then remove the front seat assembly.
#5
Driver School Candidate
Thread Starter
Join Date: Sep 2015
Location: Ontario
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
(e) Disconnect the negative (-) battery terminal.
CAUTION:
Wait at least 90 seconds after disconnecting the negative (-) battery terminal to prevent the airbag and seat belt
pretensioner from deploying .
(f) Disconnect the connectors under the seat. Then remove the front seat assembly.
CAUTION:
Wait at least 90 seconds after disconnecting the negative (-) battery terminal to prevent the airbag and seat belt
pretensioner from deploying .
(f) Disconnect the connectors under the seat. Then remove the front seat assembly.
Thread
Thread Starter
Forum
Replies
Last Post
AntzCro
ES - 1st to 4th Gen (1990-2006)
3
08-21-14 07:32 AM