YODAONE

Images contain complete listing of O.E.M. Lexus - Toyota wire loom harness connector shells for 1998 - 2000 LS400. Some overlap for 1995 - 1997. Contact pin P.N.s are not shown, but are available through Lexus ans, or Toyota. Better solution than hacking a perfectly good wiring harness with and splicing a pigtail.

Silent14

I have been combing over various diagrams trying to find the glove box light connector. Thanks for posting these.

spuds

This should be pinned if it isnt.

YODAONE

Perhaps the Administrator can shift orientation of images 90 degrees so not sideways.

spuds

I copied/saved the pics for my Lexus files and then i could rotate and zoom in on them.They are good quality pics.That worked for me on my end.

This removal tool for 15 dollars has a great following online

LISLE 56500 Wire Terminal Tool

https://www.ebay.com/itm/LISLE-56500...Cclp%3A2334524

YODAONE

You are better off with the set of Craftsman picks depicted in ignition coil connector post

https://www.clublexus.com/forums/ls-1st-and-2nd-gen-1990-2000/914937-1998-1999-2000-ls400-replacing-ignition-coil-connector-housings.html

bradland

SPUDS be sure to let us know if you decide to ditch the tool specifically designed for the task in lieu of a generic pick.

YODAONE

The generic pick has worked well and was inspired by the Lexus shop manual.

It does not appear the multi-tool depicted earlier is useful in extracting Sumitomo connector pins from their shells.


A long probe-like tool depicted here aids extraction of terminals from Sumitomo connector shells....more refined than Craftsman


Googled sumitomo removal tool 12094429 and this is what came up..




Attached terminal.Repair brochure references this tool under Sumitomo section