View Poll Results: mod your RX
not my cup of tea
61
28.37%
want to be different from other
92
42.79%
might think about if the price is right
71
33.02%
Multiple Choice Poll. Voters: 215. You may not vote on this poll
modding your rx
Lead Lap
Joined: Mar 2009
Posts: 771
Likes: 3
From: CA
Leo, I don't think you can, isn't the climate control screen is up there ? It doesn't really matter where the Nav is located it's still going to be distracting to look while driving, I remember when i had my first Eclipse AVN 2454 nav, I was paying too much attention to the Nav instead of the road, I almost rear ended someone. As far as aftermarket nav goes. I know pioneer can pipe out their video feed to rear view mirror with screen so it's not so bad ( this is in additional to headrest monitors ) I can't say for other brands because I haven't used them before. I'm about to upload some pictures I can show you what I have 
Lead Lap
Joined: Mar 2009
Posts: 771
Likes: 3
From: CA
Frank so here are the pictures of my system in parts now
System Overview
Savv auto dimm mirror with 5" LCD screen
4 channel Eclipse Amp
Competition grade class D mono block 1 ohm stable Eclipse amp
MB Quarts Premium cross over for component speakers/ Monster power digital Capacitor 1 Farad
MB Quarts Premium Speakers 6.5" and 5 1/4" in size
Pioneer 5.1 DTS surround sound decoder with DSP with 5.1 DTS controller
Pioneer center channel speaker
System Overview
Savv auto dimm mirror with 5" LCD screen
4 channel Eclipse Amp
Competition grade class D mono block 1 ohm stable Eclipse amp
MB Quarts Premium cross over for component speakers/ Monster power digital Capacitor 1 Farad
MB Quarts Premium Speakers 6.5" and 5 1/4" in size
Pioneer 5.1 DTS surround sound decoder with DSP with 5.1 DTS controller
Pioneer center channel speaker
Last edited by mowmow; Apr 5, 2009 at 01:50 PM.
Lead Lap
Joined: Mar 2009
Posts: 771
Likes: 3
From: CA
Here are more pics
Pioneer AVIC Z3 / Eclipse Half din DVD player (was installed in glove compartment) / 2nd backup camera
Ipod adapter for pioneer
XM Nav traffic and tuner and ND-Bt1 bluetooth adapter
JL10w6v2 in custom fiberglass enclosure ( picture taken when it was in my old car, I still have it but need to build a new Fiberglass enclosure for the RX)
Vertical Overview
All these are connected via Monster Power XLN cables, 4 Gauge Power cable,
4 Gauge ground cable, 2 monster power heavy duty circuit breaker was used instead of fuse, custom made ground cable set was also install to help out. I have another Eclipse 5 channel Amp, brand new sitting at home also.
I will shrink the picture size in a couple of days when I have more time
sorry I had to split into 2 post but picture rules only allow 10 pics per post
Pioneer AVIC Z3 / Eclipse Half din DVD player (was installed in glove compartment) / 2nd backup camera
Ipod adapter for pioneer
XM Nav traffic and tuner and ND-Bt1 bluetooth adapter
JL10w6v2 in custom fiberglass enclosure ( picture taken when it was in my old car, I still have it but need to build a new Fiberglass enclosure for the RX)
Vertical Overview
All these are connected via Monster Power XLN cables, 4 Gauge Power cable,
4 Gauge ground cable, 2 monster power heavy duty circuit breaker was used instead of fuse, custom made ground cable set was also install to help out. I have another Eclipse 5 channel Amp, brand new sitting at home also.
I will shrink the picture size in a couple of days when I have more time
sorry I had to split into 2 post but picture rules only allow 10 pics per post
Last edited by mowmow; Apr 5, 2009 at 02:45 PM.
Lead Lap
Joined: Mar 2009
Posts: 771
Likes: 3
From: CA
You're welcome Leo, so far all I have done is lighting, i.e change out the high beam and foglight bulbs with PIAA Xtreme white 9005, 9006 bulbs, I had them for a while, they work great for now until my retrofit guy start working on my quad hid retrofit + hyper ballasts setup I also got the PIAA H-224 led bulb for reverse light and license plate white led. I did order the led side mirror from JDM-Nigel so thats going in too. no suspension will be done cos this is a family car, I had enough bumpy ride on my old car sitting 2" lower on Tein SSP pillow ball mount with EDFC, that was bumpy. I'l probably paint the spoiler and side skirt to match the color of the car, crystal white, that is still undecided and don't want to spend too much money right away either, so I will enjoy the mods 1 at a time. For now sound system + headrest monitors down the road
Last edited by mowmow; Apr 5, 2009 at 02:48 PM.
Rookie
Joined: Dec 2008
Posts: 60
Likes: 0
From: Chinatown,NYC
You're welcome Leo, so far all I have done is lighting, i.e change out the high beam and foglight bulbs with PIAA Xtreme white 9005, 9006 bulbs, I had them for a while, they work great for now until my retrofit guy start working on my quad hid retrofit + hyper ballasts setup I also got the PIAA H-224 led bulb for reverse light and license plate white led. I did order the led side mirror from JDM-Nigel so thats going in too. no suspension will be done cos this is a family car, I had enough bumpy ride on my old car sitting 2" lower on Tein SSP pillow ball mount with EDFC, that was bumpy. I'l probably paint the spoiler and side skirt to match the color of the car, crystal white, that is still undecided and don't want to spend too much money right away either, so I will enjoy the mods 1 at a time. For now sound system + headrest monitors down the road
Lead Lap
Joined: Mar 2009
Posts: 771
Likes: 3
From: CA
06 CPO RX400h
It's a going to be a long process to setup the Quad HID setup mainly b'cos I got to think of something for the DRL. Hyper ballast is already done with variable brightness control. Littodevil is the guy that did this for me, he is very good and not cheap but you get what you paid for. This is my old quad hid setup for the Scion tC
Quad projector write up
It's full machine mount setup, fully adjustable within. It took him for a while to design and about a month to build and finish.
It's a going to be a long process to setup the Quad HID setup mainly b'cos I got to think of something for the DRL. Hyper ballast is already done with variable brightness control. Littodevil is the guy that did this for me, he is very good and not cheap but you get what you paid for. This is my old quad hid setup for the Scion tC
Quad projector write up
It's full machine mount setup, fully adjustable within. It took him for a while to design and about a month to build and finish.
Rookie
Joined: Dec 2008
Posts: 60
Likes: 0
From: Chinatown,NYC
06 CPO RX400h
It's a going to be a long process to setup the Quad HID setup mainly b'cos I got to think of something for the DRL. Hyper ballast is already done with variable brightness control. Littodevil is the guy that did this for me, he is very good and not cheap but you get what you paid for. This is my old quad hid setup for the Scion tC
Quad projector write up
It's full machine mount setup, fully adjustable within. It took him for a while to design and about a month to build and finish.
It's a going to be a long process to setup the Quad HID setup mainly b'cos I got to think of something for the DRL. Hyper ballast is already done with variable brightness control. Littodevil is the guy that did this for me, he is very good and not cheap but you get what you paid for. This is my old quad hid setup for the Scion tC
Quad projector write up
It's full machine mount setup, fully adjustable within. It took him for a while to design and about a month to build and finish.
ClubLexus Stories
Celebrating Lexus & Toyota from Around the Globe
Lexus NX 350h: A Fuel-Sipping Secret Hot Hatch???
Michael S. Palmer
5 Best & 5 Worst Lexus Daily Drivers
Joe Kucinski
Top 5 Hottest Lexus & Toyotas in 2026 (Hardest To Buy)
Brett Foote
2026 Lexus IS 350 F Sport Review: The Last of Its Kind Still Rocks
Michael S. Palmer
Top 10 Most Confusing Things Lexus Has Ever Done!
Joe Kucinski
2026 Lexus ES Review: Lexus Re-Embraces Founding Principles
Michael S. Palmer
10 Lexus Bargains That are Cheaper Than a New Toyota RAV4
Joe Kucinski
8 Weirdest Things Lexus Has Ever Built
Verdad Gallardo
10 Lexus Designs That Have Aged Like Fine Wine
Verdad Gallardo
Rookie
Joined: Dec 2008
Posts: 60
Likes: 0
From: Chinatown,NYC
06 CPO RX400h
It's a going to be a long process to setup the Quad HID setup mainly b'cos I got to think of something for the DRL. Hyper ballast is already done with variable brightness control. Littodevil is the guy that did this for me, he is very good and not cheap but you get what you paid for. This is my old quad hid setup for the Scion tC
Quad projector write up
It's full machine mount setup, fully adjustable within. It took him for a while to design and about a month to build and finish.
It's a going to be a long process to setup the Quad HID setup mainly b'cos I got to think of something for the DRL. Hyper ballast is already done with variable brightness control. Littodevil is the guy that did this for me, he is very good and not cheap but you get what you paid for. This is my old quad hid setup for the Scion tC
Quad projector write up
It's full machine mount setup, fully adjustable within. It took him for a while to design and about a month to build and finish.
Leo
btw how's your 400h driving? any problems? how's the pick up? thinking to get an 07 or 06 RX or the new venza. but i really like the RX since 04.
thanks for everything and the awesome write up!
Rookie
Joined: Dec 2008
Posts: 60
Likes: 0
From: Chinatown,NYC
call me on this:
http://littodevilperformance.com
will be making A LOT of money. you will become...in the future on CL, a sponsor and everyone will go to you for headlight conversions.
wish you luck!
http://littodevilperformance.com
will be making A LOT of money. you will become...in the future on CL, a sponsor and everyone will go to you for headlight conversions.
wish you luck!
Lead Lap
Joined: Mar 2009
Posts: 771
Likes: 3
From: CA
Leo
I can't get credit for the retrofit because this is done by my friend littodevil in San Francisco, CA. He is the owner and master designer of the shop, the write up you saw is for Scion tC, I had the quad hid (FX bixeon and valeo setup) for about 2 yrs, it was awesome and it's unique because it's a one of one master piece. I sold the retrofit to my buddy, it's going to get painted to match his white tC. I will contact littodevil and see what he can do for mass production for the RX crowd if the demand is there.
I learn all about the headlights info from hidplanet.com and a lot from littodevil. The retrofit will take a while to finish due to lack of time and design also will take some time but yes when it's all done, I will definitely take lots of picture and post it on CL
On your other note, Venza is not as nice as the RX, I like my 06RX400h a lot more, it's roomy and on the freeway ramp, it has plenty of pickup and go, much better than the Venza's pickup speed. I did test drove a Venza and a RX400h on the same day just to compare initially. I'm happy with my RX no complaints except for Nav update taking out
the override feature mainly, hence the dual screen setup once I have the jdm double din
bracket from Todd.
I can't get credit for the retrofit because this is done by my friend littodevil in San Francisco, CA. He is the owner and master designer of the shop, the write up you saw is for Scion tC, I had the quad hid (FX bixeon and valeo setup) for about 2 yrs, it was awesome and it's unique because it's a one of one master piece. I sold the retrofit to my buddy, it's going to get painted to match his white tC. I will contact littodevil and see what he can do for mass production for the RX crowd if the demand is there.
I learn all about the headlights info from hidplanet.com and a lot from littodevil. The retrofit will take a while to finish due to lack of time and design also will take some time but yes when it's all done, I will definitely take lots of picture and post it on CL
On your other note, Venza is not as nice as the RX, I like my 06RX400h a lot more, it's roomy and on the freeway ramp, it has plenty of pickup and go, much better than the Venza's pickup speed. I did test drove a Venza and a RX400h on the same day just to compare initially. I'm happy with my RX no complaints except for Nav update taking out
the override feature mainly, hence the dual screen setup once I have the jdm double din
bracket from Todd.
Rookie
Joined: Dec 2008
Posts: 60
Likes: 0
From: Chinatown,NYC
Leo
I can't get credit for the retrofit because this is done by my friend littodevil in San Francisco, CA. He is the owner and master designer of the shop, the write up you saw is for Scion tC, I had the quad hid (FX bixeon and valeo setup) for about 2 yrs, it was awesome and it's unique because it's a one of one master piece. I sold the retrofit to my buddy, it's going to get painted to match his white tC. I will contact littodevil and see what he can do for mass production for the RX crowd if the demand is there.
I learn all about the headlights info from hidplanet.com and a lot from littodevil. The retrofit will take a while to finish due to lack of time and design also will take some time but yes when it's all done, I will definitely take lots of picture and post it on CL
On your other note, Venza is not as nice as the RX, I like my 06RX400h a lot more, it's roomy and on the freeway ramp, it has plenty of pickup and go, much better than the Venza's pickup speed. I did test drove a Venza and a RX400h on the same day just to compare initially. I'm happy with my RX no complaints except for Nav update taking out
the override feature mainly, hence the dual screen setup once I have the jdm double din
bracket from Todd.
I can't get credit for the retrofit because this is done by my friend littodevil in San Francisco, CA. He is the owner and master designer of the shop, the write up you saw is for Scion tC, I had the quad hid (FX bixeon and valeo setup) for about 2 yrs, it was awesome and it's unique because it's a one of one master piece. I sold the retrofit to my buddy, it's going to get painted to match his white tC. I will contact littodevil and see what he can do for mass production for the RX crowd if the demand is there.
I learn all about the headlights info from hidplanet.com and a lot from littodevil. The retrofit will take a while to finish due to lack of time and design also will take some time but yes when it's all done, I will definitely take lots of picture and post it on CL
On your other note, Venza is not as nice as the RX, I like my 06RX400h a lot more, it's roomy and on the freeway ramp, it has plenty of pickup and go, much better than the Venza's pickup speed. I did test drove a Venza and a RX400h on the same day just to compare initially. I'm happy with my RX no complaints except for Nav update taking out
the override feature mainly, hence the dual screen setup once I have the jdm double din
bracket from Todd.
Rookie
Joined: Feb 2006
Posts: 77
Likes: 1
From: CA