ClubLexus - Lexus Forum Discussion
0 2022/01/24 21:34:08
0 2022/01/24 21:26:08
Front side image of lower trim panel depicting coated bracket
Front side image of lower trim panel depicting coated bracket
0 2022/01/24 10:48:42
0 2022/01/24 10:45:43
Frontside lower trim panel with switch assembly
Frontside lower trim panel with switch assembly
0 2022/01/24 10:44:20
Replacement fuel door/ trunk lid releae switch and keylock switch assembly installed in lower trim panel.
Replacement fuel door/ trunk lid releae switch and keylock switch assembly installed in lower trim panel.
0 2022/01/24 10:41:08
0 2022/01/24 04:14:13
0 2022/01/24 04:13:22
PCV system.with oil.catch cans and check valve
PCV system.with oil.catch cans and check valve
0 2022/01/24 04:11:38
Normally aspirated PCV system
Normally aspirated PCV system
0 2022/01/24 04:09:38
J.B. Weld plastic epoxy
J.B. Weld plastic epoxy
0 2022/01/23 19:17:14
0 2022/01/23 19:14:02
0 2022/01/23 07:31:37
Self-tapping screw removed, but took out internal plastic threads from mounting boss along with it. Brittle 25 year old plastic..
Self-tapping screw removed, but took out internal plastic threads from mounting boss along with it. Brittle 25 year old plastic..
0 2022/01/22 14:41:43
Key lock switch assembly and plastic support plate
Key lock switch assembly and plastic support plate
0 2022/01/22 14:39:27
Frontside of switch housing assembly. Slight crack in plastic fuel door lever which was caught in time to epoxy.
Frontside of switch housing assembly. Slight crack in plastic fuel door lever which was caught in time to epoxy.
0 2022/01/22 14:35:42
The original switch housing assembly top depicts split boss. This can be repaired by inserting a wedge in adjoining pocket and filling with epoxy. The screw holes can be repaired by rolling epoxy over boss threads. On replacement part, have begun process of filling pockets with epoxy to strengthen the mount bosses.
The original switch housing assembly top depicts split boss. This can be repaired by inserting a wedge in adjoining pocket and filling with epoxy. The screw holes can be repaired by rolling epoxy over boss threads. On replacement part, have begun process of filling pockets with epoxy to strengthen the mount bosses.
0 2022/01/22 14:28:08
Image depicts ovidation between the probe base and plastic connector.
Image depicts ovidation between the probe base and plastic connector.
0 2022/01/21 15:59:15
0 2022/01/21 15:57:21
This is 1998 - 2000 ECT sensor. Notice the brass collar is missing at junction with exposef plastic base...so no lateral support. Someone might not have thought this one through.
This is 1998 - 2000 ECT sensor. Notice the brass collar is missing at junction with exposef plastic base...so no lateral support. Someone might not have thought this one through.
0 2022/01/21 15:48:35
1990 - 1997 ECT sensor feature a raised collar which the green connect nestles.
1990 - 1997 ECT sensor feature a raised collar which the green connect nestles.
0 2022/01/21 15:46:46
The earlier version employs a collar around the base which appears more durable.
The earlier version employs a collar around the base which appears more durable.
0 2022/01/19 18:59:46
1999 LS400 sensor does not have a brass collar around the plastic base to bettee secure it as does earlier versions. Based (no pun intended) on the issue with mine, the newer style does not appear to be a mechanical improvement.
1999 LS400 sensor does not have a brass collar around the plastic base to bettee secure it as does earlier versions. Based (no pun intended) on the issue with mine, the newer style does not appear to be a mechanical improvement.
0 2022/01/19 18:54:34
1999 LS400 ECT sensor
1999 LS400 ECT sensor
0 2022/01/19 18:53:28
1996 LS400 ECT sensor
1996 LS400 ECT sensor
0 2022/01/19 18:52:26
1993 ECT sensor
1993 ECT sensor
0 2022/01/19 18:51:28
50V 100uf
50V 100uf
0 2022/01/19 15:48:34
50V 22uf
50V 22uf
0 2022/01/19 15:47:08
0 2022/01/19 15:44:29
Image depicting door ECU relays.
Image depicting door ECU relays.
0 2022/01/19 15:42:41
0 2022/01/19 09:47:46
New connector shell depicting locking mechanism. Due to tight confines, it is challenging to depress the lance to release it from the ECT sensor.
New connector shell depicting locking mechanism. Due to tight confines, it is challenging to depress the lance to release it from the ECT sensor.
0 2022/01/17 17:44:05
Probe was at 6.5 @ 32 F before image was taken...
Probe was at 6.5 @ 32 F before image was taken...
0 2022/01/17 17:35:33
Image depicting separation from connector to probe. My beat guess is water or condensation accumulated and then froze and caused separation.
Image depicting separation from connector to probe. My beat guess is water or condensation accumulated and then froze and caused separation.
0 2022/01/15 20:31:19
0 2022/01/13 11:47:10
Appears like new...
Appears like new...
0 2022/01/13 11:44:39
North America bulb diagram (ahem)
North America bulb diagram (ahem)
0 2022/01/13 11:29:49
This is right hand drive bulb diagram, but the same bulbs and more descriptive than North American bulb diagram. Replaced 4 all 83109-30070 bulbs and 10 of 90981-11018 bulbs below. All sockets were in good shape except "D" . Socket 83101-30050 (blue) is discontinued so swapped it with air bag socket.
This is right hand drive bulb diagram, but the same bulbs and more descriptive than North American bulb diagram. Replaced 4 all 83109-30070 bulbs and 10 of 90981-11018 bulbs below. All sockets were in good shape except "D" . Socket 83101-30050 (blue) is discontinued so swapped it with air bag socket.
0 2022/01/13 11:19:43
Small shop with lots of interesting audio components in for repair.
Small shop with lots of interesting audio components in for repair.
0 2022/01/13 11:05:00
If oil lealing where oil filter bracket mates with engine block, replace gasket #15692.
If oil lealing where oil filter bracket mates with engine block, replace gasket #15692.
0 2022/01/12 20:01:07