ClubLexus - Lexus Forum Discussion
0 2022/03/14 04:00:31
0 2022/03/14 03:56:59
0 2022/03/14 03:54:23
Silicone sealed and foam block glued back into position. After silicone has cured for 24hours, will reapply foam rubber insulator.
Silicone sealed and foam block glued back into position. After silicone has cured for 24hours, will reapply foam rubber insulator.
0 2022/03/13 11:26:51
0 2022/03/13 11:26:28
0 2022/03/13 11:24:52
0 2022/03/13 07:55:21
0 2022/03/13 07:52:11
Another fissure
Another fissure
0 2022/03/12 18:00:08
Onset cracking
Onset cracking
0 2022/03/12 18:00:04
Opposite end with 4 plastic bosses.
Opposite end with 4 plastic bosses.
0 2022/03/12 18:00:00
JB Plastic Bond applied around end of plastic boss
JB Plastic Bond applied around end of plastic boss
0 2022/03/12 17:59:54
Backside of armrest at switch plate opening with 5 bosses
Backside of armrest at switch plate opening with 5 bosses
0 2022/03/12 17:59:48
0 2022/03/12 17:55:34
Close-up image depicting onset cracking
Close-up image depicting onset cracking
0 2022/03/12 17:55:31
4 plastic bosses on opposite end
4 plastic bosses on opposite end
0 2022/03/12 17:55:26
Underside of armrest where switch panel resides. 5 plastic bosses
Underside of armrest where switch panel resides. 5 plastic bosses
0 2022/03/12 17:55:20
0 2022/03/12 17:15:09
Use wood hardener in well ventilated area.
Use wood hardener in well ventilated area.
0 2022/03/07 15:05:41
Varathane Wood Hardener. Use in a well ventilated area.
Varathane Wood Hardener. Use in a well ventilated area.
0 2022/03/07 14:53:41
Beginning of wood fibre separation due to flexure over time
Beginning of wood fibre separation due to flexure over time
0 2022/03/07 14:52:02
0 2022/03/07 14:50:09
0 2022/03/07 14:48:49
Some wood particle separation surrounding fastener head.
Some wood particle separation surrounding fastener head.
0 2022/03/07 14:46:52
0 2022/03/07 12:06:26
A third angle depicting light leakage...
A third angle depicting light leakage...
0 2022/03/06 18:20:59
Three tabs at top of pocket behind armrest that are straightened to facilitate removal of plastic pocket.
Three tabs at top of pocket behind armrest that are straightened to facilitate removal of plastic pocket.
0 2022/03/06 18:20:55
0 2022/03/06 18:20:50
Another area.
Another area.
0 2022/03/06 18:20:44
Placed a flashlight on opposite side to visually highlight the gaps. If light can get through, than so too exterior noise.
Placed a flashlight on opposite side to visually highlight the gaps. If light can get through, than so too exterior noise.
0 2022/03/06 18:20:40
Plastic door pocket depicting factory glue gobs. This should have been a contiguous bead of glue to block door cavity sound from the interior.
Plastic door pocket depicting factory glue gobs. This should have been a contiguous bead of glue to block door cavity sound from the interior.
0 2022/03/06 18:20:35
0 2022/03/06 18:15:43
Backside image of door panel. To access plastic door pocket and preserve the gray foam insulator, used a curved Dremel scalpel knife to separate the factory glue from the plastic map pocket.
Backside image of door panel. To access plastic door pocket and preserve the gray foam insulator, used a curved Dremel scalpel knife to separate the factory glue from the plastic map pocket.
0 2022/03/06 18:11:34
Backside of grommet/clip.
Backside of grommet/clip.
0 2022/03/06 14:28:15
Mold mark 3 and what appears to be a logo in harness trough.
Mold mark 3 and what appears to be a logo in harness trough.
0 2022/03/06 14:28:11
Front side grommet/clip mold-marked 50840.
Front side grommet/clip mold-marked 50840.
0 2022/03/06 14:28:05
0 2022/02/24 15:07:53
0 2022/02/23 16:27:02
The extra insulator or plate appears to contour to the coil spring end to prevent extruding the upper bellows/insulator .
The extra insulator or plate appears to contour to the coil spring end to prevent extruding the upper bellows/insulator .
0 2022/02/23 16:19:22
2001-2006 rear suspension depicting a secondary upper insulator or plate between the bellows and spring
2001-2006 rear suspension depicting a secondary upper insulator or plate between the bellows and spring
0 2022/02/23 16:19:20