ClubLexus - Lexus Forum Discussion
This is how the poor lexus arrived to its new home.
This is how the poor lexus arrived to its new home.
0 2019/06/27 19:25:35
0 2017/12/22 17:51:56
0 2017/12/22 17:51:50
0 2017/12/22 17:51:45
0 2017/12/22 17:51:39
0 2017/12/22 17:51:33
0 2017/12/22 17:51:27
0 2017/12/22 17:51:21
0 2017/12/22 17:51:16
0 2017/12/22 17:50:13
0 2017/12/22 17:49:48
After
After
0 2018/12/10 18:51:03
Before
Before
0 2018/12/10 18:51:03
2 new Bellows tacked in, the turbo mates nicely to the dump pipe now
2 new Bellows tacked in, the turbo mates nicely to the dump pipe now
0 2018/12/10 18:51:01
There are no flex joints in the waste gate piping
There are no flex joints in the waste gate piping
0 2018/12/06 09:53:27
Last one
Last one
0 2018/12/06 09:53:27
Hmm.. I wonder if the V-band is leaking here...
Hmm.. I wonder if the V-band is leaking here...
0 2018/12/06 09:53:27
More
More
0 2018/12/06 09:53:27
Its creating this gap at the turbo, which is also leaking. I've ordered some 304 bellows to fix the issue. It will be interesting to cut and weld the dirty stainless
Its creating this gap at the turbo, which is also leaking. I've ordered some 304 bellows to fix the issue. It will be interesting to cut and weld the dirty stainless
0 2018/12/06 09:53:27
Gratuitous engine shots
Gratuitous engine shots
0 2018/12/06 09:53:18
0 2018/12/06 09:52:40
0 2018/12/06 09:52:40
0 2018/12/06 09:52:40
0 2018/12/06 09:52:40
0 2018/12/06 09:52:40
0 2018/12/06 09:52:39
Twins
Twins
0 2018/11/30 18:27:41
Prepping the new engine. The exhaust needs some minor modifications to seal better, and to move the O2 sensor closer to the turbo - The O2 readings seem skewed. Sealing leaks and moving the bung up 4 v-bands should help
Prepping the new engine. The exhaust needs some minor modifications to seal better, and to move the O2 sensor closer to the turbo - The O2 readings seem skewed. Sealing leaks and moving the bung up 4 v-bands should help
0 2018/11/25 18:23:17
So much room for activities
So much room for activities
0 2018/11/25 18:23:17
Its out!
Its out!
0 2018/11/25 18:23:17
Roughed in an adapter to use the factory P/N selector switch. Credit for this idea goes to @Idlefree who used something similar on his build.
Roughed in an adapter to use the factory P/N selector switch. Credit for this idea goes to @Idlefree who used something similar on his build.
0 2019/02/24 14:39:45
The size difference is concerning, but I have seen SC300 builds with the 4L80. Hopefully it will fit with no cutting...
The size difference is concerning, but I have seen SC300 builds with the 4L80. Hopefully it will fit with no cutting...
0 2019/02/09 07:11:10
The custom transmission finally arrived. The project has been on hold waiting for this
The custom transmission finally arrived. The project has been on hold waiting for this
0 2019/02/09 07:11:05
0 2018/11/14 19:28:05
The first day in weeks with no rain or snow forecast. Everyone outside for a garage cleanup!
The first day in weeks with no rain or snow forecast. Everyone outside for a garage cleanup!
0 2019/02/09 07:10:57
They hold up great!
They hold up great!
0 2019/02/09 07:10:49
Cut stud fits with ~0.060" clearance to the gear. The slot makes it easy to install and remove.
Cut stud fits with ~0.060" clearance to the gear. The slot makes it easy to install and remove.
0 2018/11/14 19:28:04
Transferring the engine to the legs
Transferring the engine to the legs
0 2019/02/09 07:10:38
LS2 Truck coils with heat sinks!
LS2 Truck coils with heat sinks!
0 2018/11/14 19:25:21
Fabricated legs for the engine, to get rid of the engine stand and allow for transmission attachment
Fabricated legs for the engine, to get rid of the engine stand and allow for transmission attachment
0 2019/02/09 07:10:25