ClubLexus - Lexus Forum Discussion
0 2017/03/20 05:05:15
0 2017/05/10 07:19:18
18” 4Runner limited wheels for winter set.
18” 4Runner limited wheels for winter set.
0 2018/11/03 08:27:54
0 2018/11/09 09:58:18
0 2019/01/21 19:47:04
0 2019/01/21 19:48:28
0 2019/01/21 19:52:24
This pic shows when 4 LO joined the party.
This pic shows when 4 LO joined the party.
0 2019/01/21 19:53:47
0 2019/01/25 13:07:05
0 2019/01/25 13:07:05
0 2019/01/25 13:07:06
0 2019/01/25 13:07:07
0 2019/01/25 13:10:23
0 2019/01/25 13:10:23
0 2019/01/25 13:10:23
0 2019/01/25 13:10:25
Wiring looks exposed to me, do other GX’s look like this?
Wiring looks exposed to me, do other GX’s look like this?
0 2019/01/25 13:31:17
I think multiple modules can replace this part number. The part that Lexus said I needed had this module attached new and had different numbers.
I think multiple modules can replace this part number. The part that Lexus said I needed had this module attached new and had different numbers.
0 2019/01/25 13:31:19
0 2019/01/25 13:31:19
0 2019/01/25 13:31:19
My winter wheel 18” set up from 4Runner limited(just added L centercaps)and best thing is they bolt right on.
My winter wheel 18” set up from 4Runner limited(just added L centercaps)and best thing is they bolt right on.
0 2019/01/31 22:17:14
0 2019/02/01 22:07:37
0 2019/02/01 22:08:38
I used these. You can see the 3 green tabs you clip off. Then when removed you just wiggle the broken tabs off to make the emblem flat.
I used these. You can see the 3 green tabs you clip off. Then when removed you just wiggle the broken tabs off to make the emblem flat.
0 2019/02/10 07:54:57
Would replacing my ECU with this work?
Would replacing my ECU with this work?
0 2019/02/10 08:02:53
For people interested.
For people interested.
0 2019/02/10 13:52:42
If I need ABS solenoid, this one seems like the best deal, it’s from a Toyota Land Cruiser 150 but the part number 89541-60191 advics solenoids matches
If I need ABS solenoid, this one seems like the best deal, it’s from a Toyota Land Cruiser 150 but the part number 89541-60191 advics solenoids matches
0 2019/03/10 13:52:55
New rear harness connection at left rear sensor
New rear harness connection at left rear sensor
0 2019/03/14 17:55:43
Old harness connection showing signs of corrosion
Old harness connection showing signs of corrosion
0 2019/03/14 17:55:52
Inside the connector of old harness shows more corrosion, it’s important to note that when checked the the multi-meter showed normal findings similar to the issue member Jacket had. Time will tell if this was the permenant fix.
Inside the connector of old harness shows more corrosion, it’s important to note that when checked the the multi-meter showed normal findings similar to the issue member Jacket had. Time will tell if this was the permenant fix.
0 2019/03/14 17:56:00
0 2019/03/28 19:20:36
Passengers side
Passengers side
0 2019/03/28 19:20:49
This is from my wife’s rental, 2017 Nissan Sentra base with manual seats has rear camera grid lines. My $60k when new truck doesn’t have it and can’t add it. Infuriating. Almost makes me trade in my 2011 for 2014
This is from my wife’s rental, 2017 Nissan Sentra base with manual seats has rear camera grid lines. My $60k when new truck doesn’t have it and can’t add it. Infuriating. Almost makes me trade in my 2011 for 2014
0 2019/07/16 09:48:20
Definitely has grid lines incorporated in camera
Definitely has grid lines incorporated in camera
0 2019/07/16 10:32:54
Few options for mounting looks like it could work.
Few options for mounting looks like it could work.
0 2019/07/16 10:33:02
Here is where I need the audio/video techs. Everything looks like it would work but I have no idea what connections on the OEM camera look like and if it’s the correct voltage etc. any input would be great.
Here is where I need the audio/video techs. Everything looks like it would work but I have no idea what connections on the OEM camera look like and if it’s the correct voltage etc. any input would be great.
0 2019/07/16 10:33:07
I’m thinking I would only need the camera with the attached black wire(and green wire that superimposes the grid lines
I’m thinking I would only need the camera with the attached black wire(and green wire that superimposes the grid lines
0 2019/07/16 10:45:31
I’m not sure if the grid lines could be adjusted for the width of different vehicles
I’m not sure if the grid lines could be adjusted for the width of different vehicles
0 2019/07/16 10:45:46
I’m not sure what the connection looks like plugging into the OEM camera but will I need something like this?
I’m not sure what the connection looks like plugging into the OEM camera but will I need something like this?
0 2019/07/16 22:23:24
And I know you also mentioned our factory camera system uses 6v power and aftermarkets are 12v, so would I need this converter as well. As you can tell I’m not a techie by any stretch. I may just buy the camera with the grids and take it to a mobile audio store and they can figure out the install
And I know you also mentioned our factory camera system uses 6v power and aftermarkets are 12v, so would I need this converter as well. As you can tell I’m not a techie by any stretch. I may just buy the camera with the grids and take it to a mobile audio store and they can figure out the install
0 2019/07/16 22:23:29