ClubLexus - Lexus Forum Discussion
Another possibility is your trunk is locked at dashboard. This image depicts locked trunk (but does not lock gas filler door)
Another possibility is your trunk is locked at dashboard. This image depicts locked trunk (but does not lock gas filler door)
0 2021/06/03 21:36:53
Image depicting unlocked position..keylock extends further out.
Image depicting unlocked position..keylock extends further out.
0 2021/06/03 21:39:17
0 2021/06/04 12:43:01
With trunk liner removed, applied seam sealer to the perimeter of triangular openings. Discernible difference in noise. Solid thunk when knocking. The one-part seam sealer smells to high heaven while drying.
With trunk liner removed, applied seam sealer to the perimeter of triangular openings. Discernible difference in noise. Solid thunk when knocking. The one-part seam sealer smells to high heaven while drying.
0 2021/06/07 18:42:21
One-part product used...applies like a chalk gun. Two-part is also available ($), but will dry much faster.
One-part product used...applies like a chalk gun. Two-part is also available ($), but will dry much faster.
0 2021/06/07 18:49:09
Marine grade 3:1 heat shrink tubing with internal adhesive applied to hood latch control rod.
Marine grade 3:1 heat shrink tubing with internal adhesive applied to hood latch control rod.
0 2021/06/08 20:37:39
Drooping bulb access panel on trunk lid liner on 1999 LS400.
Drooping bulb access panel on trunk lid liner on 1999 LS400.
0 2021/06/12 19:51:39
0 2021/06/12 19:54:25
Trunk tail lamp assembly backside image depicting pedestal with counterpart plastic mating velcro square clip.
Trunk tail lamp assembly backside image depicting pedestal with counterpart plastic mating velcro square clip.
0 2021/06/12 19:55:35
...with square clip removed
...with square clip removed
0 2021/06/12 19:59:43
New vs old clip. Plastic nubs on old clip are missing, cracked and worn
New vs old clip. Plastic nubs on old clip are missing, cracked and worn
0 2021/06/12 20:01:08
"Fastener hook" p.n. is 90530-14001. Removal of old hooks is achieved with a thin tapered plastic trim tool. New hooks snap right into place..
"Fastener hook" p.n. is 90530-14001. Removal of old hooks is achieved with a thin tapered plastic trim tool. New hooks snap right into place..
0 2021/06/12 20:04:27
0 2021/06/12 22:44:41
0 2021/06/12 22:45:30
This is used to cover stud in fuse box...but need longer part.
This is used to cover stud in fuse box...but need longer part.
0 2021/06/12 22:48:05
0 2021/06/13 20:20:10
0 2021/06/13 20:20:55
Top Engine Cleaning Instructions
Top Engine Cleaning Instructions
0 2021/06/16 20:33:19
Nozzle/diffuser tube and siphon tube assembly
Nozzle/diffuser tube and siphon tube assembly
0 2021/06/16 20:34:38
0 2021/06/16 20:36:06
0 2021/06/16 20:37:33
0 2021/06/16 20:38:14
The lower cluster bezel assembly with potentiometer brightness control knob.
The lower cluster bezel assembly with potentiometer brightness control knob.
0 2021/06/19 21:09:45
Backside depicting female connector and mounting screws.
Backside depicting female connector and mounting screws.
0 2021/06/19 21:14:51
Potentiometer removed from bezel. Potentiometer shown with jam nut that will be replaced with rotary shaft seal with insert molded nut.
Potentiometer removed from bezel. Potentiometer shown with jam nut that will be replaced with rotary shaft seal with insert molded nut.
0 2021/06/19 21:16:10
APM-Hexseal rotary shaft seal 1332/39.with correct M7 X 0.75 metric threads.
APM-Hexseal rotary shaft seal 1332/39.with correct M7 X 0.75 metric threads.
0 2021/06/19 21:18:58
Am removing the sealing lip from the base of the rotary shaft seal because it is not necessary, I need the clearance, and because I need the nut to ground the wire lug below OEM nut to the bushing.
Am removing the sealing lip from the base of the rotary shaft seal because it is not necessary, I need the clearance, and because I need the nut to ground the wire lug below OEM nut to the bushing.
0 2021/06/19 21:23:25
A side-by-side comparison of APM-Hexseal part and OEM.jamb nut.
A side-by-side comparison of APM-Hexseal part and OEM.jamb nut.
0 2021/06/19 21:27:35
Have removed back cover of brighnrss control assembly to better illustrate fit of the APM part inside the knob cavity.. Here knob is not pushed in all the way.
Have removed back cover of brighnrss control assembly to better illustrate fit of the APM part inside the knob cavity.. Here knob is not pushed in all the way.
0 2021/06/19 21:29:47
Backside of control knob depicting casting flash that must be removed to allow clearance for APM.nut.
Backside of control knob depicting casting flash that must be removed to allow clearance for APM.nut.
0 2021/06/19 21:32:48
After molding flash removed with an exacto knife and slight radius applied to inside cavity and lower lip.of knob, it slips right over the APM nut.
After molding flash removed with an exacto knife and slight radius applied to inside cavity and lower lip.of knob, it slips right over the APM nut.
0 2021/06/19 21:34:50
Applied Toyota Rubber Grease to rotary shaft and seal lips to facilitate APM insertion over shaft and smooth rotation.
Applied Toyota Rubber Grease to rotary shaft and seal lips to facilitate APM insertion over shaft and smooth rotation.
0 2021/06/19 21:37:46
0 2021/06/19 21:45:06
0 2021/06/19 21:45:42
Available and in stock at Mouser Electronics.
Available and in stock at Mouser Electronics.
0 2021/06/19 22:04:01
Nakamichi speaker library. Two sets.
Nakamichi speaker library. Two sets.
0 2021/06/26 17:48:13
5.25".
5.25".
0 2021/06/26 17:49:19
Nakamichi speaker library. Nakamichi housings feature a taper.
Nakamichi speaker library. Nakamichi housings feature a taper.
0 2021/06/26 18:06:08
Front Nakamichi speaker housing profile.
Front Nakamichi speaker housing profile.
0 2021/06/26 18:08:52
Rear Nakamichi speaker housing profile.
Rear Nakamichi speaker housing profile.
0 2021/06/26 18:09:58