ClubLexus - Lexus Forum Discussion
Almost back together, just waiting for the outer tie rod ends to show up!
Almost back together, just waiting for the outer tie rod ends to show up!
0 2015/08/15 08:52:13
New ball joint
New ball joint
0 2015/08/15 08:54:12
New control arm.
New control arm.
0 2015/08/15 08:54:46
Almost ready for the alignment machine!
Almost ready for the alignment machine!
0 2015/08/15 08:58:55
0 2015/08/15 09:00:04
0 2015/08/15 09:01:59
The tie rods half installed...
The tie rods half installed...
0 2015/08/15 09:07:21
New tie rod end installed, I really like the quality of Moog products! Most if not all come with grease zerks!
New tie rod end installed, I really like the quality of Moog products! Most if not all come with grease zerks!
0 2015/08/15 09:07:27
0 2015/08/15 09:07:31
0 2015/08/15 09:07:36
Left side rear end, showing the camber and toe adjustments
Left side rear end, showing the camber and toe adjustments
0 2015/08/15 09:10:25
This is where the magnaflow exhaust is going to be installed!!! YESSSS!
This is where the magnaflow exhaust is going to be installed!!! YESSSS!
0 2015/08/15 09:10:30
Right rear camber and toe adjustments
Right rear camber and toe adjustments
0 2015/08/15 09:10:35
Finally on to the alignment machine! This is good machine!
Finally on to the alignment machine! This is good machine!
0 2015/08/15 09:13:24
This machine is very sweet!
This machine is very sweet!
0 2015/08/15 09:14:34
Adjusting the camber.
Adjusting the camber.
0 2015/08/15 09:14:38
Tracy really took his time to make sure everything was perfect! He even took the time to tell me what he was doing every step of the way! He would make a fantastic automotive instructor!!! He adjusted the rear camber to .09 on each side, that was max. And he made sure toe was close to zero. These guys are good!!!
Tracy really took his time to make sure everything was perfect! He even took the time to tell me what he was doing every step of the way! He would make a fantastic automotive instructor!!! He adjusted the rear camber to .09 on each side, that was max. And he made sure toe was close to zero. These guys are good!!!
0 2015/08/15 09:15:15
Cheers!!!
Cheers!!!
0 2015/08/15 10:55:49
I am pointing out the leak...everyone, be sure to watch this area for leaks.
I am pointing out the leak...everyone, be sure to watch this area for leaks.
0 2015/08/17 01:59:01
Right next to the upper radiator hose...
Right next to the upper radiator hose...
0 2015/08/18 16:37:35
0 2015/08/24 13:17:15
0 2015/08/24 13:17:28
0 2015/08/24 13:17:37
Front center engine, where throttle body is bolted to intake. Check for missing or cracked rubber.
Front center engine, where throttle body is bolted to intake. Check for missing or cracked rubber.
0 2015/09/10 03:29:18
I replaced this vacuum line because it cracked, the rubber is becoming very brittle on my car due to age and heat.
I replaced this vacuum line because it cracked, the rubber is becoming very brittle on my car due to age and heat.
0 2015/09/10 03:30:24
Check PCV hose.
Check PCV hose.
0 2015/09/10 03:31:11
This was the OEM vacuum line, note the split on the end.
This was the OEM vacuum line, note the split on the end.
0 2015/09/10 03:36:24
0 2015/09/27 02:44:28
0 2015/09/27 02:44:30
0 2015/09/27 02:44:31
0 2015/09/27 02:44:33
0 2015/09/27 02:44:37
0 2015/10/15 13:13:34
0 2015/10/15 13:13:45
0 2015/10/15 13:14:00
0 2015/10/16 18:05:12
0 2015/10/16 18:05:22
0 2015/10/16 18:05:30
0 2015/10/17 17:58:25
0 2015/10/17 17:58:36