ClubLexus - Lexus Forum Discussion
0 2014/11/29 15:29:32
0 2014/11/29 15:29:30
0 2014/11/29 15:29:28
0 2014/11/29 15:29:26
0 2014/11/29 15:29:23
Rear speakers with the connection outside of the speaker (just the way it worked out).
Rear speakers with the connection outside of the speaker (just the way it worked out).
0 2014/11/29 13:31:05
Front speakers with the connection behind the speaker.
Front speakers with the connection behind the speaker.
0 2014/11/29 13:31:02
There is a slot for the wire on the adapters so pay attention to the direction that the speaker needs to be mounted in order to line up with the door connection.
There is a slot for the wire on the adapters so pay attention to the direction that the speaker needs to be mounted in order to line up with the door connection.
0 2014/11/29 13:30:58
I used sheet rock screws for the adapters.
I used sheet rock screws for the adapters.
0 2014/11/29 13:30:55
Push the strip down on the door and pop the door panel back on (be sure to check that the clips are seated properly).
Push the strip down on the door and pop the door panel back on (be sure to check that the clips are seated properly).
0 2014/11/29 13:30:53
To reinstall the panel you need to remove the black metal window strip. This piece has to be pushed down on the door and it also has the typical Lexus clips for the door panel, so the 2 needed directions will not work while it is attached to the panel (I hope that makes sense).
To reinstall the panel you need to remove the black metal window strip. This piece has to be pushed down on the door and it also has the typical Lexus clips for the door panel, so the 2 needed directions will not work while it is attached to the panel (I hope that makes sense).
0 2014/11/29 13:30:50
Remove the plastic window pillar triangle. There is only 2 screws to remove, 1 behind the door release(remove the plastic cover) and the 2nd is behind the arm rest that was removed. Now, just pull the door panel off starting from the bottom.
Remove the plastic window pillar triangle. There is only 2 screws to remove, 1 behind the door release(remove the plastic cover) and the 2nd is behind the arm rest that was removed. Now, just pull the door panel off starting from the bottom.
0 2014/11/29 13:30:48
Remove the arm rest and the window/door lock and unplug it.
Remove the arm rest and the window/door lock and unplug it.
0 2014/11/29 13:30:46
I didn't find anything like the Metra speaker connectors for the dash so I spliced it.
I didn't find anything like the Metra speaker connectors for the dash so I spliced it.
0 2014/11/29 13:30:44
factory, Infinity and Kenwood comparison.
factory, Infinity and Kenwood comparison.
0 2014/11/29 13:30:42
The larger magnet will fit snugly with the plastic air pipes.
The larger magnet will fit snugly with the plastic air pipes.
0 2014/11/29 13:30:40
Pry the left and right up from the front and pull it toward you. The center has clips all the way around.
Pry the left and right up from the front and pull it toward you. The center has clips all the way around.
0 2014/11/29 13:30:39
Hmm..4 wires, I was hoping that the head unit processed this. I didn't change tweeters out. I am happy with the highs I now have.
Hmm..4 wires, I was hoping that the head unit processed this. I didn't change tweeters out. I am happy with the highs I now have.
0 2014/11/29 13:30:38
Noo!! This is not the way to go.
Noo!! This is not the way to go.
0 2014/11/29 13:30:36
Installed speakers
Installed speakers
0 2014/11/29 13:30:35
Returned speakers
Returned speakers
0 2014/11/29 13:30:34
0 2014/11/23 14:40:57
0 2014/11/23 14:40:54
0 2014/11/23 14:40:50
0 2014/11/23 14:40:47
The window strip had the typical Lexus clips on it that the panel does but, it also needs to be pushed on the door from the top so the two securing pieces need to be separated.
The window strip had the typical Lexus clips on it that the panel does but, it also needs to be pushed on the door from the top so the two securing pieces need to be separated.
0 2014/11/23 14:40:44
When reinstalling the panel you will need to remove the black window strip and install it first. Why you ask hmmm move on.
When reinstalling the panel you will need to remove the black window strip and install it first. Why you ask hmmm move on.
0 2014/11/23 14:40:42
Pull the door panel off starting from the bottom. You will still have 2 cables (door lock and door release) I just let it hang with something supporting the weight...well most of the time. The rear door is the same procedure but with out the window pillar and the need to deal with the courtesy light.
Pull the door panel off starting from the bottom. You will still have 2 cables (door lock and door release) I just let it hang with something supporting the weight...well most of the time. The rear door is the same procedure but with out the window pillar and the need to deal with the courtesy light.
0 2014/11/23 14:40:40
To remove the front doors panels you only have 2 screws, 1 behind the door release handle and 1 behind the arm rest. remove the window/door lock panel and unplug it and remove the triangle piece at the front window pillar. The courtesy light can be removed now or unplugged later.
To remove the front doors panels you only have 2 screws, 1 behind the door release handle and 1 behind the arm rest. remove the window/door lock panel and unplug it and remove the triangle piece at the front window pillar. The courtesy light can be removed now or unplugged later.
0 2014/11/23 14:40:38
I didn't find adapters online (didn't try to hard) so I used a quick splice available at any parts store.
I didn't find adapters online (didn't try to hard) so I used a quick splice available at any parts store.
0 2014/11/23 14:40:36
Stock/Infinity/Kenwood
Stock/Infinity/Kenwood
0 2014/11/23 14:40:34
I had to stuff the larger magnet into the center dash speaker. What you see is the plastic flexible air vent pipes
I had to stuff the larger magnet into the center dash speaker. What you see is the plastic flexible air vent pipes
0 2014/11/23 14:40:32
Pry up the front of the left and right and pull it towards you, the center is clipped all the way around.
Pry up the front of the left and right and pull it towards you, the center is clipped all the way around.
0 2014/11/23 14:40:31
4 wires on the tweeter? I was hoping that the head unit would handle the processing. I skipped this for now.
4 wires on the tweeter? I was hoping that the head unit would handle the processing. I skipped this for now.
0 2014/11/23 14:40:29
NO this is not the way to go. Remove the 2 handle screws and pull of the pillar.
NO this is not the way to go. Remove the 2 handle screws and pull of the pillar.
0 2014/11/23 14:40:28
The speakers installed
The speakers installed
0 2014/11/23 14:40:27
This is what I returned
This is what I returned
0 2014/11/23 14:40:26
0 2014/11/23 14:09:28
0 2014/11/23 14:09:24
0 2014/11/23 14:09:20