offset question

Reply Subscribe

Thread Tools

Search this Thread

Aug 30, 2007 | 07:43 AM

boosted-gs

Thread Starter

Pole Position

Joined: Jan 2007

Posts: 209

Likes: 0

From: on

offset question

i was just wondering how these offsets would look on my car which is a gs300 99. like will they sit to far in or sit to far out?

19*8 with a 34-36 offset and a
19*10 for the rear with a 40 offset

with 235/35/19 tires
and 275/30/19 for the rear...

thanks

Aug 30, 2007 | 09:00 AM

rominl

exclusive matchup

iTrader: (4)

Joined: May 2002

Posts: 81,825

Likes: 410

From: Lovely OC

the front is very safe

the rear you might rub a bit but take off the fender tab or maybe shave a little and you are good to go

Aug 30, 2007 | 09:08 AM

V8_Aristo

Bippu

Joined: Dec 2003

Posts: 1,664

Likes: 0

From: California

This will depend on how low you are, since wheel clearance from the fender get deeper the lower you go. At stock height to an inch drop, it will look almost flush.

Aug 30, 2007 | 09:26 AM

boosted-gs

Thread Starter

Pole Position

Joined: Jan 2007

Posts: 209

Likes: 0

From: on

well i'm not planning to drop that much maybe 1.2 in front and 1.5 in the rear... so you think i'll rub in the rear?

Aug 30, 2007 | 10:17 AM

V8_Aristo

Bippu

Joined: Dec 2003

Posts: 1,664

Likes: 0

From: California

I have seen a 19x10 +37 (w/ 275/30/19) fit w/o fender modifications, so a +40 should clear (since it's 3mm deeper). In the event that is does not, you can just unscrew the molding that goes on top of the lip. This simple trick can add another 3mm clearance if you need it.