I'm looking into the 5Zigen fn01rc wheels for my GS (98) and I was planning on going with 18's... I was planning on 7.5 in the front 9.5 in the rear - would this work out ok? Also, Would I need spacers or anything on the lines? Thanks!

 

Any help?

 

............

 

... what offsets are you looking purchase. Also it would help if you put a tire size.

or... you can do a search on wheel fitments


Yuji

 

I put the FN01-RCs on the NSX. Nicely made wheels, especially for the price. Nice & lightweight, too.

5Zigen can probably make a recommendation... do you have a big brake kit? Some of the FN01-RCs fit over big brakes, some don't... and it depends on the brake kit.

An 18x7.5 is pretty narrow for the front of the 2GS- the OE 17" wheels are 17x8.

I actually have the width/offset chart for the FN01-RC which we used to spec-out the NSX wheels. If I were doing 18" FN01-RCs on a 2GS I would do:

Aggressive set-up:
Front 18x8.5 +32
Rear 18x9.5 +35

Conservative set-up:
Front 18x8.5 +38
Rear 18x9.5 +45

Be sure to get the hub rings for Toyota/Lexus (60.1mm) so they'll be hub-centric (they charge a few extra dollars for these, typically).

.... and post some pics!

 

Awesome, thanks a ton! I have stock brakes/stock height, so I'm trying to keep the same size sidewall so the wheelwells stay filled.