Tire sizing help!..
#1
Rookie
Thread Starter
Join Date: Oct 2003
Location: California
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
Tire sizing help!..
Hey all,
I searched but didnt help so heres my question, will a 275/35zr/19 tire cause rubbing on my 93 sc400?? Or any other prolblem I might not be aware of?
Thanks for the help everyone
I searched but didnt help so heres my question, will a 275/35zr/19 tire cause rubbing on my 93 sc400?? Or any other prolblem I might not be aware of?
Thanks for the help everyone
#2
Lexus Fanatic
iTrader: (8)
if you're going to do 275-35-19 then up front you SHOULD be going for 245-40-19 to even both ends out. But i don't think you're going to rub, but mainly depends on how LOW you are going to lower your car.
I was thinking about this setup but decided not to. The rears shouldn't be too much of a problem, but the front might rub hard when the springs compress and the tire hits the top lining where the wires are located (manaray). other than that, no problem!
edit: i had 245-35-19 and 275-30-19 combo on my 93' SC.
I was thinking about this setup but decided not to. The rears shouldn't be too much of a problem, but the front might rub hard when the springs compress and the tire hits the top lining where the wires are located (manaray). other than that, no problem!
edit: i had 245-35-19 and 275-30-19 combo on my 93' SC.
Last edited by AutoCoutureSC; 01-03-04 at 08:19 PM.
#5
Rookie
Thread Starter
Join Date: Oct 2003
Location: California
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
so i will need to get new tires up front then, cause the ones ima get r from my friend bu he has 275's all around.
Thanks a lot do luck, youve been a great help man.
Thanks a lot do luck, youve been a great help man.
#7
Lexus Fanatic
iTrader: (8)
Originally posted by rominl
actually if you have the perfectly right offset, 275/30/19 in the front will work
actually if you have the perfectly right offset, 275/30/19 in the front will work
no doubt it would look awesome, but man, if you're buying the rims from your friend then you can't get the "custom" offset that you need, unless it's from the same car or maybe the same company. who knows, but show us some pics if you decide to get them!
Trending Topics
#8
exclusive matchup
iTrader: (4)
Originally posted by do-luck sc
that's true henry, but even with the right offset, wouldn't it rub the control arms when you make any sort of turn? or what about when you lower your car? a guy in hawaii had some 19x9.5 in front i believe, i forget, but his tires were stretched JDM style in order to make them fit.
no doubt it would look awesome, but man, if you're buying the rims from your friend then you can't get the "custom" offset that you need, unless it's from the same car or maybe the same company. who knows, but show us some pics if you decide to get them!
that's true henry, but even with the right offset, wouldn't it rub the control arms when you make any sort of turn? or what about when you lower your car? a guy in hawaii had some 19x9.5 in front i believe, i forget, but his tires were stretched JDM style in order to make them fit.
no doubt it would look awesome, but man, if you're buying the rims from your friend then you can't get the "custom" offset that you need, unless it's from the same car or maybe the same company. who knows, but show us some pics if you decide to get them!
Thread
Thread Starter
Forum
Replies
Last Post
futuregs
Wheels, Tires & Brakes Forum
4
03-28-02 03:45 PM