GSracerRY

Hey guys. It seems like these are really two of the only aftermarket parts which can help to adjust negative camber. I looked through other posts, but none were really clear as to peoples thoughts on these two products. Do any of your recommend one over the other? My car is lowered about 2.5" now.

ReyRey305

iTrader: (3)

I am about to install the SPC front ball joints and rear control arms this weekend, along with my BC coils with Swift Springs. I can let you know this weekend !

VIPking

iTrader: (2)

My only concern with the spc ball joints would be their a bit more bulky than the oem ones and might bottom out on the top of the inner fender. So you might need to cut a clearance hole for the upper control arm if you go low enough.

ReyRey305

iTrader: (3)

a lot of people are recommending to get them so they can't be all that bad. Tomorrow I will find out and give a review on everything.

ReyRey305

iTrader: (3)

I got everything installed this weekend at Circuit Motorsports in Orlando, FL. I drove up from Miami to get the BC-R Coilovers + Swift Springs, SPC Front adjustable ball joints, and SPC Rear Control Arms. All I have to say is i am extremely pleased with the quality and work at Circuit Motorsports. My alignment is on point and the suspension rides smooth. I love the BC - R Coils and Swift Springs are a added bonus. I would highly recommend the rear extenders too, I can change my dampning in less than 10 seconds.