BBK Question
Thread Starter
Driver School Candidate
Joined: Mar 2016
Posts: 6
Likes: 0
From: HI
BBK Question
howzit. i just recently bought an 08 is250 (rwd). gonna throw a set of wilwood bbks on. not for any specific reasons other than to get rid of the anemic stock rotors and calipers. was thinking of the stage 1 superlite caliper over the stage 2 aero6 caliper, being that car is gonna be strickly a cruiser. not gonna be doing anything hard. what im wondering is, are the oem 17s bbk friendly? will they clear? if they DO clear, will the stage 2 calipers clear as well?
also have an off topic question since we are talking about wheels. i do have my eyes on new shoes. narrowed it down to 18x9.5 (f) / 18x10.5 (r). choices are volks te37sl, work vsxx, or ccw lm16. for this wheel setup, what is the the recommended offset? i noticed the offsets on some of the pics i been going through arent low. look to be about the +35 range. thanks for looking and thanks in advance.
also have an off topic question since we are talking about wheels. i do have my eyes on new shoes. narrowed it down to 18x9.5 (f) / 18x10.5 (r). choices are volks te37sl, work vsxx, or ccw lm16. for this wheel setup, what is the the recommended offset? i noticed the offsets on some of the pics i been going through arent low. look to be about the +35 range. thanks for looking and thanks in advance.
Last edited by VetteDSiN; Mar 22, 2016 at 01:54 AM.
Thread Starter
Driver School Candidate
Joined: Mar 2016
Posts: 6
Likes: 0
From: HI
jeff: thank you for the reply. looked over the specs and seems like the stage 1 wilwoods is just slightly over the 13.5" threshold lol. gonna have to look for another set of oems to run when i down the whatever wheel set i go with for maintenance.
Thread
Thread Starter
Forum
Replies
Last Post
Do.Man
LS - 1st and 2nd Gen (1990-2000)
4
Jan 28, 2011 04:12 PM
