Hey Everyone,

I was wondering if anyone had any information about this product?

http://www.mycarforum.com/index.php?...d&product=8754

I need a -3 from camber to run my wheels while lowered, and I was surprised when I searched and found many posts saying there was no front camber kit for the 2IS besides with SPC balljoint one which offers -1.5.

Does anyone know anything about this kit?

Thanks

 

Dang, and I thought my 2.5 degrees was a lot! Lol

BTW, no...they have yet to release an upper adjustable control arm :

http://hardrace.com/products.asp?str...p;strClass3=75

 

What did you use to get 2.5? And do you have a pic of what it looks like?

 

you trying to go with a crazy wheel set up? Those look like a Cusco that was supposed to be released but never did.

 

Well I'm just going by what the shop says. The my car's dropped 3 inches front and back right now on 18s.
The new wheels I got are 19x8.5 +35 in the front but need a 15mm spacer to clear the front brake calipers (something I didn't anticipate).

So basically they said my options are raise the car back up to almost stock or get a front camber kit and they estimate I will need -3 to make this work while dropped.

 

good thing you came to the forums first. Im slammed on 19x9.5 +12 and dont have front camber kit. Shop doesnt know what theyre talking about. This setup of yours is not aggressive at all.

 

Hard Race is good stuff. Posted some pics here https://www.clublexus.com/forums/sus...ntrol-arm.html

 

if you lower it you should get that, my car is slammed and my camber is 2.9

 

You want to look at Figs Mega Arms for the Gen2 IS:

http://shopfigs.com/v1/index.php?rou...tegory&path=43

 

Wow well that gives me hope, I guess the shop is just playing it safe. I picked up the SPC balljoint kit, going to get the wheels and kit installed this Friday, hopefully it all goes well.

Btw I spoke with Figs and they said they hope to release the front adjustable arm for the 2IS within the next couple months.

Thanks for the input everyone.

 

How much is slammed? 3-4 inches from stock?

 

Everyone is gonna be on those figs front adj arms...esp me

 

at least! lol

 

I am lowered on H&R springs with F-Sport shocks....my front cambers is in the -2.xx range? Is this normal or you guys are sure that it can be adjusted more?

Please recommend a shop that will be able to do this so I won't have to get SPC ball joint for the fronts...

 

That is not normal I would say seeing the drop that the H&R spring gives is not really that much. What shop told you you were at 2 + negative front camber? Unless you are have premature tire wear, let it ride!